Using The Phone; Powering On The Phone; Powering Off - Maxcom MM426 User Manual

#

4. Using the Phone

Powering On the Phone

Press and hold the red receiver End Call key to switch
on the phone.
If there is a prompt to enter the PIN Code, you will have
to enter the Code. You will get the Code in the SIM
Card starter kit.
After entering the Code, press green receiver to
confirm.
Warning: If you enter an incorrect PIN code three
times in a row, the SIM Card will be locked. To unlock
the SIM Card, the PUK Code is required. If you enter
incorrect PUK Code 10 times, the SIM Card will be
permanently locked.
The phone will automatically update time and date from
the GSM network.

Powering Off

To power off the phone, press and hold the End Call
key.
18
Press: Text input method change
while typing a text message; enters
the hashtag #
Press & Hold: Enables/disables
Silent mode