Pyle PDMIC58 User Manual

Handling & Precautions
Covering and/or obstructing the microphone top mesh grill and internal mic receiver diaphragm element will
result in less than optimal performance, causing audio distortion and interfered sound signal.
To avoid such audio interferences try decreasing the audio source's volume, than position the microphone
diaphragm so that it is not directly pointed or exposed to the external audio source; allow su cient separation
distance between the microphone and external audio source. The microphone internal system contains sensitive
audio equipment and electronic components, do not drip, hit or expose to forceful impact.
Do not store or operate the microphone in a high temperature, or high humidity, environment.
Operation & Performance
The optimum placement distance of the microphone and vocals (distance from your mouth to the microphone grill)
is from 5 to 10 centimers. If the microphone placement is too close to your mouth, the sound and audio pickup
performance may be unclear, outputting excessive bass and distortion in the audio tone.
Microphone Connection
Align the output connector with the slotted insert of the incoming connection cable -- ensure the connector
alignment is positioned properly and adequate pressure is used when inserting the connection (you may hear a
"click" sound to ensure proper connection). To unplug the microphone, hold down the button lab, and ensure it is
depressed, then pull the connection cable outward gently.
www.PyleUSA.com