Page 1
INSTRUCTIONS FOR USE Azzurro 708BS electric cosmetic chair 3 motors Importer: ACTIVESHOP Ltd. Ul. Graniczna 8b, building DC2A 54-610 Wroclaw, Poland www.activeshop.com.pl Rev. A/05/2024...
Page 2
Before using the cosmetic chair, read the instructions and perform the following steps: 1. Make sure all packaging materials are removed. 2. Make sure the seat is in working order. 3. Place the cosmetic chair in the place where it will be used. 4.
Page 3
Construction of the device: Headrest Support Armrest Seat Footstool Foot control Warning: 1. The footrest is not designed to support the full weight of an adult. 2. Do not sit directly on the armrest or footrest. 3. Make sure that the distance between outlets does not exceed 2 meters. Note 1.
Page 4
8. Make sure there are no sharp or harmful objects around the seat that could damage the device. 9. Do not modify the device yourself. If the chair does not work properly, stop using it and contact an authorized service center. Remote control functions 1 - On/Off Switch 2,3 -Height adjustment 4,5...
Page 5
1. Height adjustment Turn on the power switch. Then, on pedal No. 1, press , to adjust the height of the seat. Power button 2. Backrest adjustment On pedal #2, press , to adjust the backrest position. 3. Seat adjustment On pedal #3, press , to adjust the position and tilt of the seat.
Page 6
4. Adjusting the footrest The footrest is adjustable by a lever located under the seat. Grab the lever and tilt the footrest to the desired position. Each footrest is individually adjustable. Footrest adjustment lever 5. Footrest extension The chair also has an option to extend the footrest, which makes it easier to perform treatments o n taller people and improves comfort.
Page 7
Armrest installation: Slide the armrest into the hole located on the side of the backrest. The armrest should be firmly attached. Twist it to the right or left so that it goes into place properly. Do the same with the other armrest. The armrest is perpendicular to the ground (regardless of the angle of the seat).
Page 8
Cleaning and disinfection of the device: Disconnect the device from the power supply before cleaning. To keep the chair's surface in good condition, clean it regularly. Remember to clean and disinfect the chair after each use. It is recommended to perform a thorough disinfection once a month. I Metal and plastic surfaces To clean metal and plastic surfaces and controls wipe them with a damp cloth.
4. Immediately remove the plug from the outlet and contact the authorized service provided by ACTIVESHOP Ltd. in the following cases: a) liquid has entered the device, b) the device emits a strange odor, smoke or makes strange sounds, (c) the power cord was damaged, (d) the device was knocked over or its housing was damaged.
Therefore, they should be handed over to appropriate collection points, as well as they can also be handed over to ACTIVESHOP Ltd. STORAGE AND TRANSPORT The device should be transported at a temperature in the range of (-) 20 °C to (+) 50 °C only in its...
Need help?
Do you have a question about the Azzurro 708BS and is the answer not in the manual?
Questions and answers