Page 2
Before using the cosmetic chair, read the instructions and perform the following steps: 1. Make sure all packaging materials are removed. 2. Make sure the seat is in working order. 3. Place the cosmetic chair in the place where it will be used. Tip! Children and inexperienced people must not use this device.
Page 3
Installation instructions for the device: Place the couch on a flat, stable surface. Attach the frame as shown in the picture. Adjust the position of the support as follows. Lift installation: Installation of a metal frame:...
Page 4
Installation of backrest adjustment mechanism: Footrest installation: Unscrew the screw on the footrest adjustment tube, raise the footrest, align the footrest adjustment tube with the hole in the adjusting element and insert the footrest adjustment tube, and then tighten the screw. Armrest installation: Slide the armrest into the hole located on the side of the backrest.
Page 5
Backrest adjustment: a) Raise the lever located under the backrest, thus the backrest will begin to lift up. b) To lower the backrest pull from the lever, then move the backrest to the desired position. Tilt adjustment: Pull the lever and then press down on the seat to adjust the desired seat angle or return the seat to the flat position.
Page 6
Footrest adjustment: Pull the footrest lever and press or raise the footrest to adjust t h e angle. Each footrest is separately adjustable, making it easy to perform the pedicure treatment for complete comfort. Footrest lever Footrest extension: Each footrest can be further extended to lengthen it. To adjust the footrests, loosen the knob located under the footrest and extend the footrest.
Any service and repair work must be performed only by an authorized service technician (ACTIVESHOP L t d .). 3. Do not install or operate the device near liquids, wet places or with wet hands - so that no liquids get into the device.
Therefore, they should be handed over to appropriate collection points, as well as they can also be handed over to ACTIVESHOP Ltd. STORAGE AND TRANSPORT The device should be transported at temperatures between (-) 20 °C and (+) 50 °C only in its...
Page 9
and a relative humidity of no more than 75%. Operating temperature from (+) 10 °C to (+) 40 °C. During the storage and transportation processes, the device must not be thrown or dropped, exposed to mechanical shocks or weathering.
Need help?
Do you have a question about the Azzurro 563S and is the answer not in the manual?
Questions and answers