Page 2
Before using the cosmetic chair, read the instructions and perform the following steps: 1. Make sure all packaging materials are removed. 2. Make sure the seat is in working order. 3. Place the cosmetic chair in the place where it will be used. 4.
Page 3
Seat positions can be adjusted using the remote control. To adjust the height of the seat that is in the recliner position, press Adjusting the backrest and footrest: To adjust the position of the backrest and footrest, grab the appropriate lever. When adjusting the backrest, grab the lever located under the backrest and raise it up, or lower it down (depending on your preferred positioning), thereby raising or lowering the backrest.
- Wipe the surface of the seat evenly with a special leather cleaner, then wipe it with a clean, soft cloth. Maintenance Unplug the device before maintenance. 1. Repairs should be performed by experienced and manufacturer-authorized personnel. Repair by unauthorized personnel may cause injury or damage to the device, for which the manufacturer is not responsible.
4. Immediately remove the plug from the outlet and contact the authorized service provided by ACTIVESHOP Ltd. in the following cases: a) liquid has entered the device, b) the device emits a strange odor, smoke or makes strange sounds, (c) the power cord was damaged, (d) the device was knocked over or its housing was damaged.
Page 6
Relative temperature of no more than 75%. Operating temperature from (+) 10 °C to (+) 40 °C. During the storage and transportation processes, the device must not be thrown or dropped, exposed to mechanical shock or weathering.
Need help?
Do you have a question about the Azzurro 673A and is the answer not in the manual?
Questions and answers