Haier HSU-18LEA03 Operation Manual page 10

Operation
Air Flow Direction Adjustment
1.Status display of air sending
Horizontal flap
( Cool/Dry standard position)
Pos.1
( Upward swing )
Pos.2
Pos.3
( Downward swing )
Pos.4
( Auto swing )
2.Up and down air flow direction(Use remote controller)
For each press of SWING button, air flow direction onremote
controller display as follows according to different operation modes:
Pos.1
The horizontal flap will swing according to the above positions
3.Left and right air flow adjustment(manual)
Move the vertical blade by a knob on airconditioner
to adjust left and right direction referring to Fig.
Cautions:
Do not try to adjust the flap by hand.
When adjusting the flap by hand,turn off the unit ,and use the remote controller to
restart the unit.
When humidity is high,condensate water might occur at air outlet if all vertical
louvers are adjusted to left or right.
It is advisable not to keep horizontal flap at downward position for a long time in
COOL or DRY mode ,otherwise, condensate water might occur.
Hints
As cold air flows downward in COOL mode, adjusting air flow horizontally will be
much more helpful for a better air circulation.
As warm air flows upward in HEAT mode, adjusting air flow oblique downwards will
be much more helpful for a better air circulation.
Pos.2 Pos.3
Remote controller
Blank
Pos.4
.
9
HEALTH ON/OFF
FAN
MODE
SWING
TIMER
CLOCK
SET
SLEEP
LOCK
RESET