Table of Contents
Advertisement
Quick Links
SWIMMING POOL AUTOMATION SYSTEM
Instruction manual
Kompact and Kompact+ M5
Read carefully and keep for future reference. Please study the manual closely, before
bringing the system into service(version 4)
1 - The content of this booklet may be modified without prior notice.
2 - Printing restrictions mean that the displays shown in this booklet may vary from
those actually appearing on the product.
3 - The content of this booklet may not be reproduced in any way without the
manufacturer's permission.
1
Advertisement
Table of Contents
Related Manuals for Klereo Kompact
Summary of Contents for Klereo Kompact
- Page 1 SWIMMING POOL AUTOMATION SYSTEM Instruction manual Kompact and Kompact+ M5 Read carefully and keep for future reference. Please study the manual closely, before bringing the system into service(version 4) 1 - The content of this booklet may be modified without prior notice.
- Page 2 To return to the programmed filtration mode, go to the filtration menu or press and hold the button for 5s. II – Navigation in the Klereo menus definition Screen selection keys: each display defines the function of these keys. Their functions vary...
-
Page 3: Table Of Contents
10. CONTROL Modes ....................15 11. System Status ....................15 12 .PARAMETRES ....................15 13. SOFTWARE ....................... 16 14. Activation of the klereo connection ..............16 15. PROBLEMS SOLVING ..................16 16. SECURITY INSTRUCTIONS ................19 17. BATTERIES AND ELECTRONIC EQUIPMENTS DISPOSAL ......19... -
Page 4: Description
, power and flow rate of the filter pump). It regulates also the pH and disinfectant The Kompact M5 kit is composed of a pH regulation. For disinfectant you can choose liquid chlorine, bromine , or active oxygen . Kompact+ M5 includes the electrical box and light transformer. - Page 5 Quick access to the « system status » The browse key When pressing the browse key on the right, you will get a screen with the Klereo system status. It will provide a summary of filtering, heating and water treatment (pH + disinfectant) settings.
-
Page 6: Home Screen
2. Water pH and temperature values 3. filtration area 4. Programmed mode and filtration status 5. Access to the Klereo menu 6. Manual start or stop of the filtration (maintenance mode) An alternative home display is available. To use it just go to :... -
Page 7: Main Menu
– Maintenance: to indicate the different elements consumptions. – Pool regulation Modes: to select between “comfort” and “eco” mode – System Status: shows the operational status of the Klereo system – Parameters: to access system parameters – Software: to know the installed software version and do the updating. -
Page 8: Available Programming Modes
6.1 Available programming modes Programming Function Operating mode mode Regulated Filtration Regulated according to water temperature Time slots Operation programmed in time slots Filtering Manual Always ON or OFF Force Filt. Filtering is ON when lighting is ON Timer Automatically turned OFF at the end of the setup time. Lighting Time slots Operation programmed in time slots... -
Page 9: Manual Mode
6.2 Manual mode The manual mode is for setting the function ON or OFF. If filtering is on OFF manual mode, Klereo system will not regulate water treatment and heating. A message «filt. manual off» will appear on the display. -
Page 10: Time Slots Mode
6.4 Time slots mode With this mode you can decide the filtering time slots that you wish to program. For filtering, lighting and the auxiliaries you can define time slots with a 15 min minimum duration time. For filtering, time slots must be at minimum 2 hours in a row. Indeed, to guarantee a good treatment regulation (pH and disinfectant), filtering programming must include 2 consecutive hours minimum time slots. -
Page 11: Synchronized Mode
Figure 8. Recurrence programming screens NOTE : KLEREO central units are compatible with Klereo Valve backwash systems which operate with filtration ON. Klereo valve is 230V power supplied via an available auxiliary output. In the corresponding auxiliary menu, you select the "timer" mode which we recommend setting to 2 to 4 minutes (minimum duration). -
Page 12: Filtering Tracking
Output assignment,: to set up P-Q ouput in heating mode. You can access the heating menu by going through either the main menu or the shortcut selection key on the home screen: Klereo Heating 7.1 Heating target value adjustment Go to the menu :... -
Page 13: Consumption
Change of target value Confirm Cancel or return to previous menu 7.2 Prohibit heating Klereo Heating Prevent heating This function allows you setting up one or more time slots during which you do not wish heating to be ON. For example, this allows you to stop the operation of a heat pump from 2pm to 3pm while you take a nap near the pool. -
Page 14: Maintenance
Check regularly the pool water level as well as water chemical parameters using a chemical analysis test kit. Use regularly the cleaning robot or brush the pool walls. Before conducting any operation on Klereo Kompact control box unit, turn off the power supply. 1.1 Changing water treatment product feeder When you see an empty tank message, it means that you must replace the corresponding water treatment product feeder. -
Page 15: Control Modes
Quick access to the "system status" report Shortcut: the browse key When pressing the arrow on the right, you will get a screen with the Klereo system status. It will provide a summary of filtering, heating and water treatment (pH + disinfectant) settings. -
Page 16: Software
For accessing a sub-menu or confirming an action Cancel or return to previous menu 13. SOFTWARE This menu indicates your Klereo software version and enables to decide if you need an updating or not. 14. Activation of the klereo connection Refer to the Klereo Connect manual. - Page 17 Ineff.disinfect treatment regulations and the as pH is that high injector valve condition. Kompact + does not control filtration. Filtration is forced or prohibited by an external device. Uncontrolled filtration Terminal 1-2 -3-4 Side push button (switch)
- Page 18 Check the selected treatment Sensor set-up problem the selected water treatment mode For matching go to menu: Link problem + "Equipment The Klereo treatment (1) is not Klereo / Parameters / Set-up / name (1)" matched with the Kompact Radio match Check probe O.R.P.
-
Page 19: Security Instructions
16. SECURITY INSTRUCTIONS The Klereo Kompact electrical installation must be made by the approriate sate of the art professional respecting the local electrical standards. Before conducting any operation on Klereo Kompact control box unit, turn off the power supply. The water treatment products must not be placed directly on the floor. - Page 20 5 rue du Chant des Oiseaux 78360 MONTESSON FRANCE Email: contact@klereo.com Tel.: +33 130 15 78 14...
Need help?
Do you have a question about the Kompact and is the answer not in the manual?
Questions and answers