TEF 9980 Ex REMOTE CONTROL - INSTALLATION AND USER MANUAL TABLE OF CONTENTSNTS: CONTENTS INTRODUCTION STORAGE AND PRESERVATION UNPACKING AND INSPECTIONS SAFETY INSTRUCTION APPLICATIONS MAINTENANCE / REPAIR / MODIFICATION INSTALLATION TECHNICAL DATA APPROVALS DRAWING 996A111471 TEF 9980 EX PANEL, CONNECTION DIAGRAM DRAWING 996A112077 TEF 9980 EX PANEL, CONNECTION TO CONTROL SYSTEM APPENDIX 1 LED INDICATION LAMP SERIES 8010 Page 2...
Repairs effecting the explosion protection of the equip- whether a cable is terminated or not. ment, may only be carried out by Tranberg AS, or quali- fied electricians in compliance with the respective national For earth connections to a stud or a bar a cable lug shall regulations.
TEF 9980 Ex REMOTE CONTROL - INSTALLATION AND USER MANUAL TECHNICAL DATA Voltage: 24V DC Current: Max 3A Temperature range: -30°C to +55°C Ingress Protection: IP 66 APPROVALS II 2G Ex db eb T5 Gb Ex db eb T5 Gb ATEX: Presafe 14ATEX4124 IECEx: IECEx PRE 14.0001 EN 60079-0: 2012/A11:2013...
TEF 9980 Ex REMOTE CONTROL - INSTALLATION AND USER MANUAL APPENDIX 1 LED INDICATION LAMP SERIES 8010 Operating Instructions Indicating lamp > 8010 Page 7...
Page 8
TEF 9980 Ex REMOTE CONTROL - INSTALLATION AND USER MANUAL APPENDIX 1 LED INDICATION LAMP SERIES 8010 Contents Contents Contents ........................2 General Information ....................2 Safety Instructions ....................3 Conformity to Standards ..................3 Intended Use ......................3 Technical Data ......................4 Arrangement and Assembly ..................5 Installation / Mains connection ................5 Commissioning ......................5 Maintenance and Servicing ...................6...
TEF 9980 Ex REMOTE CONTROL - INSTALLATION AND USER MANUAL APPENDIX 1 LED INDICATION LAMP SERIES 8010 Safety Instructions Safety Instructions The most important safety instructions are summarised in this section. They supplement the relevant regulations which must be studied by the personnel responsible. When working in hazardous areas, the safety of personnel and plant depends on ...
TEF 9980 Ex REMOTE CONTROL - INSTALLATION AND USER MANUAL Technical Data APPENDIX 1 LED INDICATION LAMP SERIES 8010 Technical Data Marking Europe (ATEX) E II 2 G Ex d e IIC E II 2 G Ex d ia/ib IIC E I M 2 Ex d e I E I M 2 Ex d ia/ib I IECEx...
TEF 9980 Ex REMOTE CONTROL - INSTALLATION AND USER MANUAL APPENDIX 1 LED INDICATION LAMP SERIES 8010 Arrangement and Assembly Arrangement and Assembly Dimensional Drawings (All Dimensions in mm) - Subject to Alterations 04494E00 Indicating lamp 8010/2 and 8010/3 Please note the following when snapping indicating lamps onto a mounting rail: The indicating lamp must not be turned at an angle! ...
TEF 9980 Ex REMOTE CONTROL - INSTALLATION AND USER MANUAL APPENDIX 1 LED INDICATION LAMP SERIES 8010 Maintenance and Servicing 10 Maintenance and Servicing Maintenance work on the devices must only be performed by personnel who are both authorised and suitably trained for this purpose. Before any work commences, the indicating lamps must be disconnected from the ...
Page 13
TEF 9980 Ex REMOTE CONTROL - INSTALLATION AND USER MANUAL APPENDIX 1 LED INDICATION LAMP SERIES 8010 Page 13...
Page 14
TEF 9980 E REMOTE CONTROL - INSTALLATION AND USER MANUAL APPENDIX 1 LED INDICATION LAMP SERIES 8010 128907 / 8010602300 2011-02-08·BA00·III·en·02 R. Stahl Tranberg AS info@stahl-tranberg.com stahl-tranberg.com Main office: Strandsvingen 6 N-4032 Stavanger Norway +47 51 57 89 00 +47 51 57 89 50 Office Oslo: Luhrtoppen 2 N-1470 Lørenskog...
Need help?
Do you have a question about the TEF 9980 040 and is the answer not in the manual?
Questions and answers