Health Airflow Operation - Haier H2SM-18RA03 Operation Manual

Operation

Health airflow Operation

1.Press ON/OFF to starting
The liquid crystal will display the working state of last time
(Except timer, sleeping, power/soft and health airflow).
Setting the comfort work conditions.
2.The setting of health airflow function
1).Press the button of health airflow,
display. The nether inlet and outlet grills of the air conditio
are closed and the airflow is blown horizontally from the above
inlet and outlet grills. Avoid the strong airflow blows direct
the body.
2).Press the button of health airflow again,
the display. The above inlet and outlet grills of the air condi
are closed and the airflow is blown vertically from the nether
inlet and outlet grills. Avoid the strong airflow blows direct
the body.
3.The cancel of the health airflow function
Press the button of health airflow again, both the inlet and
outlet grills of the air conditioner are opened, and the unit g
on working under the condition before the setting of health
airflow function.
After stopping, the outlet grille will close automatically.
Notice: Cannot pull direct the outlet grille by hand. Otherwise
the grille will run incorrectly. If the grille is not run corre
for a minute and then start, adjusting by remote controller.
Note:
1 .After setting the health airflow function, the position of i
and outlet grills is fixed.
2.In heating, it is better to select the
3.In cooling, it is better to select the
4.In cooling and dry, using the air conditioner for a long time
under the high air humidity, a phenomenon falling drips of
water occurs at the outlet grille .
5.Select the appropriate fan direction according to the actual
conditions.
19
appears on the
appears on
mode.
mode.