Product Overview The Lap table turns any chair or sofa into a workplace. Designed for occasional use the Lap table supports your Laptop or tablet device allowing you to work in informal work settings. Dimensional limits 480mm 690 to 690mm...
Specification Base – profiled counter balanced steel base for stability. Obround column from steel tube that bolts to the base. The top is supported by a steel plate with through holes for fixing to underside of tops. M6 machine screws attach the base to the top. Tops - Square edge table tops are fabricated from 25mm thick MFC (melamine faced chipboard) with 2mm ABS edging with 2mm radiused edges &...
Standard Finishes 25mm top square edge detail Square Edge Ply Edge Maple White Light Grey Alchemy Oak Standard specification will match the edge finish with the top finish. Contrast edge & ply effect edge are available at standard cost. Washed Oak...
Relocation All furniture should be picked up & NOT dragged. Linked items should be separated before relocating. All fixings are reusable. Assembly instructions form part of this document.
Maintenance Alchemy underframes are considered to be maintenance free, however the following should be observed during the products lifetime:- Frames - Where cleaning of the frame is required a mild detergent solution should be used. The use of harsh abrasives, acids, alkalis or bleaching products is not recommended.
& installed correctly as per Alchemy installation & relocation instructions. Alchemy reserve the right to refuse replacement or repair if we feel that the product has been abused or has been accidently damaged by another party. Alchemy also reserves the right to attempt to repair any damaged or faulty products before a decision is made to replace them.
Need help?
Do you have a question about the Lap and is the answer not in the manual?
Questions and answers