Download Print this page

EasyPro AquaShine WFL4 Instructions For Operation Manual

Fountain light kit

Advertisement

Quick Links

Stainless Steel, Warm White LED Light Kits
Stainless Steel, Warm White LED Light Kits
Four-light kits for fountains up to 3 hp
Four-light kits for fountains up to 3 hp
Six-light kits for 3 hp to 5 hp fountains
Six-light kits for 3 hp to 5 hp fountains
Compatible with Kasco VFX or JF series fountains with one piece float.
Compatible with Kasco VFX or JF series fountains with one piece float.
Also compatible with other major fountain brands with a simple
Also compatible with other major fountain brands with a simple
Instructions for Operation •
Instructions for Operation • Safety • Warranty
Thank you for purchasing the AquaShine™ warm white LED fountain light kit.
This kit will transform your fountain into a beautiful night time display. These low
voltage lights use only 11.5 watts per fixture (maximum with full color mix).
Safety and Electrical Connections
1.
Never enter water with electrical connections plugged in or in
operation. Even though units are supposed to be connected to GFCI
protection, it is NEVER recommended to enter water with equipment in
operation.
2. Lights must be attached to matching 2 pin cords and 2 pin 12 volt AC
controller as provided.
3. Never connect the lights directly to a 110 volt or higher outlet.
4. Connect the supplied controller/transformer to a 110 volt receptacle that is
protected by a Ground Fault Circuit Interrupter.
5. Do not modify wiring in any way, quick plug ends must stay intact to
function and should not be replaced with any other connections.
6. Not approved for swimming pool or spa use.
7. All electrical work must be performed by a qualified technician. Always follow
the National Electrical Code (NEC) or the Canadian Electrical Code as well as
all local, state and provincial codes. Failure to follow manufacturer's installation
instructions may result in electrical shock, fire hazard, personal injury or
death, damaged equipment, provide unsatisfactory performance and will void
manufacturer's warranty.
WFL4 • WFL6N
Fountain Light Kit
Fountain Light Kit
hardware modification. n.
hardware modificatio
Safety • Warranty
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the AquaShine WFL4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for EasyPro AquaShine WFL4

  • Page 1 WFL4 • WFL6N Fountain Light Kit Fountain Light Kit Stainless Steel, Warm White LED Light Kits Stainless Steel, Warm White LED Light Kits Four-light kits for fountains up to 3 hp Four-light kits for fountains up to 3 hp Six-light kits for 3 hp to 5 hp fountains Six-light kits for 3 hp to 5 hp fountains Compatible with Kasco VFX or JF series fountains with one piece float.
  • Page 2 Controller/Transformer Specifications • 115 volt, 60hz input, 12 volt AC output • Includes built in voltage regulator for cables up to 300’ long • Digital timer with 16 on/off settings and manual override • Outdoor rated Stainless Steel Light Specifications •...
  • Page 3: General Instructions

    General Instructions Inspect the box and check for damaged or missing parts. Contact your EasyPro supplier if products are damaged in shipping. Parts Included WFL4 Four Light Kits • Two stainless steel fixtures with pigtail • Two stainless steel mounting brackets with hardware •...
  • Page 4 General Instructions Inspect the box and check for damaged or missing parts. Contact your EasyPro supplier if products are damaged in shipping. Parts Included WFL6N Six Light Kits • Six stainless steel fixtures with pigtail • Six stainless steel mounting brackets with hardware •...
  • Page 5 LED Six Light Kit Assembly Instructions Kasco VFX and JF Series Units 2 hp to 5 hp Actual light fixture may vary slightly from fixtures below. 1. For 2 hp to 5 hp Kasco units, use the 3/4" pan head screws from hardware pack labelled LKH- KBW with nylock nut and smaller washer.
  • Page 6: Setting The Timer

    Setting the Timer Mount the weatherproof controller box in a secure location near a power supply and plug into 110 volt outlet. The controller is weatherproof and does not need to be protected from the weather. Example Program Functions PROGRAM Example Manual Functions AUTO...
  • Page 7: Service And Maintenance

    Operation Instructions for Manual Function 1. Be sure the controller is plugged into 110 volt GFCI protected outlet. 2. Remove clear plastic cover from timer. Keep cover safe and replace when finished. 3. Unlock the timer by pressing the “C/R” button four times. This removes the “a” character in lower left corner of the display screen.
  • Page 8 EasyPro shall not be held liable for any loss of fish, plants or any other livestock as a result of any failure or defect of this Product. This warranty gives you specific legal rights, and you may also have other rights that vary from State to State.

This manual is also suitable for:

Aquashine wfl6nAquashine wfl4-100