Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MK CTB-200
Summary of Contents for MK CTB-200
- Page 1 CTB-200 TIMING BELT CONVEYOR CLEANMOVE STANDARD Each serial number is unique to that specific unit and provides mk North America with complete order details. The serial number is located on the frame of the conveyor. See section 2 for more details.
-
Page 2: Table Of Contents
Wear Items & Maintenance For Specific Drive & Tail Options Conveyor Belt Maintenance - Tensioning & Tracking Conveyor Belt Maintenance - Belt Replacement Notes & Contact Information mk North America, Inc. 105 Highland Park Drive Bloomfield, CT 06002 (860) 769-5500 www.mknorthamerica.com... -
Page 3: General Information
1.2 The importance of reading your manual Inside this manual you will fi nd the instructions on how to set up and maintain your mk conveyor properly, as well as maximize its performance. Please take the time to read this manual and familiarize yourself with these set up and maintenance instructions. -
Page 4: Decoding Your Serial Number
DWG# field is blank it is not a cause for concern. SO#: This is the shop order number in which this unit was built. This is an mk North America, Inc. internal number. This number is also referenced on any related invoices, etc. -
Page 5: Conveyor Description
CleanMove Incline Plastic Modular Belt Conveyor CRM - CleanMove Radius Plastic Modular Belt CTF - CleanMove Flop Top Chain Conveyor CTB - CleanMove Timing Belt Conveyor mk North America, Inc. 105 Highland Park Drive Bloomfi eld, CT 06002 (860) 769-5500 www.mknorthamerica.com ©2024 Page 5... - Page 6 The CTB-200 has many typical conveyor components. Below is a description of the basic parts and options for the CTB-200 conveyor. The items you receive will vary based on your actual purchase order. Items may appear different on your model based on your particular order requirements. Consult your approval drawing for specific items included in your order.
-
Page 7: Warranty Information
Warranty mk North America, Inc. (MKNA) offers a COMPLETE ONE YEAR WARRANTY from the date of delivery, to the original purchaser of the MKNA equipment (CUSTOMER), to be free from defects in material and workmanship; under normal use and with proper installation, maintenance and cleaning. -
Page 8: Safety Requirements
Technical Documentation CTB-200 SAFETY REQUIREMENTS Warnings - Safety Guidelines READ AND UNDERSTAND ALL OF THESE WARNINGS PRIOR TO OPERATING EQUIPMENT. mk North America, Inc. 105 Highland Park Drive Bloomfield, CT 06002 (860) 769-5500 www.mknorthamerica.com ©2024 Page 8... - Page 9 SAFETY REQUIREMENTS (CONT.) NOTICE All work should be done by quali ed professionals. This includes electricians for all wiring. mk North America, Inc. 105 Highland Park Drive Bloomfi eld, CT 06002 (860) 769-5500 www.mknorthamerica.com ©2024 Page 9...
-
Page 10: Wear Items & Maintenance For Specific Drive & Tail Options
Technical Documentation CTB-200 WEAR ITEMS & MAINTENANCE FOR SPECIFIC DRIVE OPTIONS Important Notes About Wear Items & Maintenance CTB-200 mk North America, Inc. 105 Highland Park Drive Bloomfield, CT 06002 (860) 769-5500 www.mknorthamerica.com ©2024 Page 10... - Page 11 • All parts which contact the product should be cleaned weekly (example: belt). • Remove heavy grease coatings with ethyl alcohol. • Blow off debris from belts with structured surfaces using compressed air. mk North America, Inc. 105 Highland Park Drive Bloomfi eld, CT 06002 (860) 769-5500 www.mknorthamerica.com...
- Page 12 CTB-200 WEAR ITEMS & MAINTENANCE FOR SPECIFIC DRIVE OPTIONS (CONT.) CTB-200 (Cont.) NOTE: Not all items shown in all views for clarity. mk North America, Inc. 105 Highland Park Drive Bloomfi eld, CT 06002 (860) 769-5500 www.mknorthamerica.com ©2024 Page 12...
- Page 13 WEAR ITEMS & MAINTENANCE FOR SPECIFIC DRIVE OPTIONS (CONT.) CTB-200 AC (Cont.) Maintenance Work for CTB-200 Position Description Action Interval in Hours (Months) Lubrication Drive/Idler Pulley I, C 1,000 Hours (Max. 6 Months) Drive Bearing 500 Hours (Max. 3 Months) Idler Bearing 500 Hours (Max.
-
Page 14: Conveyor Belt Maintenance - Tensioning & Tracking
• Belts may need to be tracked due to shifting during shipping. • Prior to delivery of the mk conveyor, the belt was tensioned and tracked at the factory. • Belt tracking should only be done at the idler end. - Page 15 General Instructions: • The belt was tensioned and adjusted at the factory before delivery of the mk product. Loosen bolts (2) to pull the entire assembly (1) out (arrow direction) in order to pretension the timing belt. Tighten screw (4) and then fi nally adjust the timing belt with screw (3), see below.
-
Page 16: Conveyor Belt Maintenance - Belt Replacement
• To replace belt, slip it over the side of the conveyor. • Reassemble conveyor in the reverse order and the track and tension belt prior to use. (see Section 7) mk North America, Inc. 105 Highland Park Drive Bloomfi eld, CT 06002 (860) 769-5500 www.mknorthamerica.com... -
Page 17: Notes & Contact Information
NOTES & CONTACT INFORMATION Record Your Notes Contacting mk North America Email: sales@mknorthamerica.com Phone: (860) 769-5500 mk North America, Inc. 105 Highland Park Drive Bloomfi eld, CT 06002 (860) 769-5500 www.mknorthamerica.com ©2024 Page 17... - Page 18 Timing Belt Conveyor mk North America, Inc. an mk Technology Group Company 105 Highland Park Drive Bloomfield, CT 06002, USA Phone: (860) 769-5500 www.mknorthamerica.com sales@mknorthamerica.com All rights reserved, information subject to change without notice. © 2024 mk North America, Inc. REV. 2024.01.10...
Need help?
Do you have a question about the CTB-200 and is the answer not in the manual?
Questions and answers