Erbauer EAD12-Li Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Erbauer Manuals
  4. Impact Driver
  5. EAD12-Li
  6. Operating instructions manual
Erbauer EAD12-Li Operating Instructions Manual

Erbauer EAD12-Li Operating Instructions Manual

Hide thumbs

Advertisement

Table of Contents

EAN: 5059340010670
EAD12-Li
ORIGINAL INSTRUCTIONS
V110421 / BX220IM
MNL_Erbauer_EAD12-Li-2_GB_12V Angle Drill_V11_210422.indd 1
4/22/21 6:28 PM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EAD12-Li and is the answer not in the manual?

Questions and answers

Related Manuals for Erbauer EAD12-Li

Summary of Contents for Erbauer EAD12-Li

  • Page 1 EAN: 5059340010670 EAD12-Li ORIGINAL INSTRUCTIONS V110421 / BX220IM MNL_Erbauer_EAD12-Li-2_GB_12V Angle Drill_V11_210422.indd 1 4/22/21 6:28 PM...

  • Page 2: Table Of Contents

    Safety instructions Product description Assembly Care & maintenance Guarantee Declaration of conformity MNL_Erbauer_EAD12-Li-2_GB_12V Angle Drill_V11_210422.indd 2 4/22/21 6:28 PM...
  • Page 3 WARNING! Please read all safety warnings carefully and be sure that they are fully understood before handling the tool. MNL_Erbauer_EAD12-Li-2_GB_12V Angle Drill_V11_210422.indd 3 4/22/21 6:28 PM...
  • Page 4 Product description MNL_Erbauer_EAD12-Li-2_GB_12V Angle Drill_V11_210422.indd 4 4/22/21 6:28 PM...
  • Page 5 76-100% 51-75% 26-50% 5-25% <5% MNL_Erbauer_EAD12-Li-2_GB_12V Angle Drill_V11_210422.indd 5 4/22/21 6:28 PM...
  • Page 6 MNL_Erbauer_EAD12-Li-2_GB_12V Angle Drill_V11_210422.indd 6 4/22/21 6:28 PM...
  • Page 7 MNL_Erbauer_EAD12-Li-2_GB_12V Angle Drill_V11_210422.indd 7 4/22/21 6:28 PM...

  • Page 8: Safety Instructions

    Safety instructions GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
  • Page 9 c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
  • Page 10 e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.
  • Page 11 e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
  • Page 12 e) Do not use battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. f) Do not expose a battery pack or tool to fire or excessive temperature.
  • Page 13 b) Always start drilling at low speed and with the bit tip in contact with the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury. c) Apply pressure only in direct line with the bit and do not apply excessive pressure.
  • Page 14 c) Do not carry or store battery together with necklaces, hairpins or other metal objects. d) Do not pierce the battery with nails, strike the battery with a hammer, step on the battery or otherwise subject it to strong impacts or shocks. e) Do not solder directly onto the battery.
  • Page 15 s) Remove the battery from the drill or charger when not in use. The following information applies to professional users only but is good practice for all users: ADDITIONAL SAFETY WARNING FOR CONSTRUCTION DUST The updated Control of Substances Hazardous to Health Regulations 1st October 2012 now also targets to reduce the risks associated with silica, wood and gypsum dusts.
  • Page 16 This limit is the legal maximum; the most you can breathe after the right controls have been used. HOW TO REDUCE THE AMOUNT OF DUST? a) Reduce the amount of cutting by using the best sizes of building products. b) Use a less powerful tool e.g. a block cutter instead of angle grinder.
  • Page 17 WARNING! Some dust particles created by power sanding, sawing, grinding, drill and other construction jobs contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks and cement and other masonry products.
  • Page 18 The declared vibration total value has been measured in accordance with EN 62841-1 and EN 62841-2-1 and may be used for compare one tool with another. The declared vibration total value may also be used in a preliminary assessment of exposure. WARNING! The vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool...
  • Page 19 WARNING! Identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
  • Page 20 c) Use correct attachments for the product and ensure they are in good condition. d) Keep tight grip on the handles/grip surface. e) Maintain this product in accordance with these instructions and keep it well lubricated (where appropriate). f) Plan your work schedule to spread any high vibration tool use across a longer period of time.

  • Page 21: Product Description

    b) Injuries and damage to property due to broken attachments or the sudden impact of hidden objects during use. c) Danger of injury and property damage caused by flying objects or poor power tool accessories. Product description Part index The index below refers to Fig. 1 on page 4. 1.
  • Page 22 Rating label explanation EAD12-Li = Model number E = Erbauer AD = Angle Drill 12 = 12 V d.c.

  • Page 23: Assembly

    Assembly Symbols On the product, the rating label and within these instructions you will find among others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property. Volt, (alternating voltage) Millimetre Hertz Kilogram Ampere...
  • Page 24 Do not dispose of battery packs in rivers or immerse in water. Do not dispose of battery packs in fire. They will explode and cause injury. Do note expose battery packs to heat in excess of 45 °C. Do not charge or store the battery pack in temperatures below 0 °C (32 °F) and above 45 °C (113°F).
  • Page 25 Setup BATTERY PACK (NOT INCLUDED) Release / Attach 1. Lock the On/Off switch (8) to avoid accidental starting by moving the forward / reverse rotation control (4) into the middle position (See below section “Controls – Forward / reverse rotation control”). 2.

  • Page 26: Use

    2. Insert the bit all the way to the stop of the keyless chuck (1) (Fig. H). NOTE: If using a short driver bit of 25 mm, please insert it into the socket of an extension bit holder. 3. Turn the chuck sleeve (1a) clockwise until the drill or driver bit is properly fastened in the chuck jaws (1b) (Fig.
  • Page 27 Before you start Protection Controls Switching On/Off Ensure the forward / reverse rotation control (4) is not on centre lock position. 1. Switch the product on by pressing the On/Off switch (9) (Fig. J). 2. Switch the product off by releasing the On/Off switch (9). The On/Off switch (9) is fitted with a brake function which stops your chuck immediately when you quickly release the switch.
  • Page 28 1. Move the forward / reverse rotation control (4) to the left (as seen from the operator`s position) in order to use the product in a clockwise rotational mode (Fig. L). 2. Move the forward / reverse rotation control (4) to the right (as seen from the operator`s position) in order to use the product in anticlockwise rotational mode (Fig.
  • Page 29 WARNING! Keep in mind that there are buried objects hidden in every household! Ensure that there are no gas, water or power lines hidden in the working area that may be hit before operation – danger of electrical shock and serious damage to people and property! Use a suitable detector to trace such objects in advance! Drilling 1.

  • Page 30: Care & Maintenance

    Screw driving 1. Pre-drill the holes with a smaller diameter than the screw to be driven. 2. Hold the product perpendicular to the screw to be driven in/out. Holding it at an angle may cause slipping or jamming of the driver bit. 3.
  • Page 31 Do not use chemical, alkaline, abrasive or other aggressive detergents or disinfectants to clean this product as they might be harmful to its surfaces. Maintenance Your tool requires no additional lubrication or maintenance. There are no user serviceable parts in your tool. Transportation 1.
  • Page 32 WARNING! Only perform the steps described within these instructions! All further inspection, maintenance and repair work must be performed by an authorised service centre or a similarly s specialist if you cannot solve the problem yourself! Problem Possible cause Solution 1.
  • Page 33 Recycling and disposal Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or local store for recycling advice. For further information visit www.recycle-more.co.uk. Disposal of an exhausted battery pack The battery is Li-Ion type.

  • Page 34: Guarantee

    Guarantee We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product Angle Drill) has a manufacturer’s guarantee of 3 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost.
  • Page 35 Batteries and battery chargers are not covered under the Erbauer 3 Year Warranty and will have a guarantee period of 2 years from the date of purchase. If the product is defective, we will, within a reasonable time, repair or replace it.

  • Page 36: Declaration Of Conformity

    Declaration of conformity MNL_Erbauer_EAD12-Li-2_GB_12V Angle Drill_V10_210408.indd 36 4/8/21 5:27 PM...
  • Page 37 EN 62841-1:2015 EN 62841-2-1:2018+A11:2019 EN 55014-1: 2017+A11: 2020 EN IEC 55014-1:2021 EN 55014-2: 2015 EN IEC 55014-2:2021 30/11/2021 MNL_Erbauer_GB_EID12-Li-2_12V Impact driver_V12.indd 29 3/30/21 7:04 PM...
  • Page 38 BS EN 62841-1:2015 BS EN 62841-2-1:2018+A11:2019 EN 62841-1:2015 EN 62841-2-1:2018+A11:2019 EN 55014-1:2017+A11:2020 EN IEC 55014-1:2021 EN 55014-2:2015 EN IEC 55014-2:2021 BS EN 55014-1: 2017+A11: 2020 BS EN IEC 55014-1:2021 BS EN 55014-2: 2015 BS EN IEC 55014-2:2021 On:30/11/2021 MNL_Erbauer_GB_EID12-Li-2_12V Impact driver_V12.indd 29 3/30/21 7:04 PM...
  • Page 40 EU manufacturer: Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands www.diy.com | www.screwfix.com | www.screwfix.ie To view instruction manuals online, visit www.kingfisher.com/products Customer Helpline: UK 03301248111 erbauer@powertoolservicing.co.uk Eire 0035312479977 erbauer@powertoolservicing.co.uk MNL_Erbauer_EAD12-Li-2_GB_12V Angle Drill_V11_210422.indd 37 4/22/21 6:28 PM...

This manual is also suitable for:

5059340010670

Table of Contents