Advertisement
Complete Installation
1. Insertseal
behind the top of the lower window sash and
against the glass of the upper window.
2. Place the window-lock
bracket on top of lower window
and against upper window sash on right side of the window.
3. Use a 3/32" d rill bitto drill starter holes through the holes in
the bracket into the window sash.
4. Attach the window lock-bracket
to the window sash with
2-#10 x 3/4_' r ound-head screws to secure window in place.
C
A
A, Window
lock
bracket
B. Upper
window
glass
C. Foam
window
sash
seal
NOTES:
Handle air conditioner
gently.
Be sure your air conditioner
cabinet does not fall out of the
opening during installation or removal.
The place where the power cord exits the air conditioner
should be no more than 4 ft(122 cm)from
a grounded
3 prong outlet.
Do not block the louvers on the front panel.
Do not block the louvers on the outside of the air conditioner.
It is the customer's
responsibility
and obligation to have this
product installed by a qualified technician familiar with
through-the-wall
room air conditioner
installations.
Option
1--Wood,
metal or plastic molding
When using a wood, metal or plastic molding, the wood frame
should line up with the inside wall as shown.
ABC
)
I
•
©
i
©
A. Molding
B. Inside wall
C. Wood frame
D, Louvers
Option 2--Plastered wall with no molding
If the plastered wall is to be flush with the cabinetand no molding
is used, the wood frame must be setlA" (13 mm)into the inside
wall.
AB
C
D
A, Plastered
wall
Wood
frame
B. Inside
wall
D. Louvers
Install Wood Frame
1. Construct the wood frame. See "Location
Requirements"for
dimensions.
2. Measure the outside width and heightof
frame to
determine wall opening dimensions.
3.
Cutthe opening through the wall. Remove and save insulation.
NOTES:
•
Dimension for depth depends on wall thickness and
type of molding.
•
Do not block louvers in air conditioner
cabinet.
6
Advertisement
