Download Print this page

MOSSBACK FISH HABITAT SAFE HAVEN XL KIT Instructions

Advertisement

Quick Links

S A F E H AV E N X L K I T
One Triangle Base and Shade Top, nine screws,
three Safe Haven XL trunks, eighty-four 60" limbs
1. Insert trunks into post base and secure with provided
self-tapping screws. TIP: Note the correct orientation of the V shape.
There are NO pre-drilled holes for the self-tapping screws.
2. Insert one limb into the second V from the top of each trunk (see diagram).
3. Lay shade top over top of trunks and secure by inserting limbs in top row of V's
on top of each trunk (see diagram).
4. Insert limbs in the remaining V's on each trunk.
5. Place gravel, concrete block(s), or bag of concrete in base to weigh
product down (not included).
shade top
limb
2
3-post base
self-
tapping
screw
trunk
Do not place in swimming or boating areas. Check your local game laws.
( 1 1 3 lb s . )
3
Shade top should be
secured between rst
and second row of limbs
per trunk. Place shade
top over trunks BEFORE
inserting top row of
limbs.

Advertisement

loading
Need help?

Need help?

Do you have a question about the SAFE HAVEN XL KIT and is the answer not in the manual?

Questions and answers

Summary of Contents for MOSSBACK FISH HABITAT SAFE HAVEN XL KIT

  • Page 1 S A F E H AV E N X L K I T ( 1 1 3 lb s . ) One Triangle Base and Shade Top, nine screws, three Safe Haven XL trunks, eighty-four 60" limbs 1. Insert trunks into post base and secure with provided self-tapping screws.
  • Page 2 T R O P H Y T R E E X L ( 16 lb s . ) limb One 60" Trophy Tree XL trunk, twelve 60" limbs Shade top sh self- 1. Position trunk upright where slits appear as “V” shapes. tapping secured betw screw...
  • Page 3 B L O C K A D A P T E R ( 2 lb s . ) One base plate affixed to an 11 inch connector sleeve, one top plate, two screws (for use with Root Wad*, Safe Haven, Safe Haven XL, Trophy Tree, Trophy Tree XL, Predator Prey Combo Tree, and John Godwin Signature Crappie Tower) 1.