HP NC373m - PCI Express Dual Port Multifunction Gigabit Server Adapter User Manual
Proliant accelerated iscsi for linux
Hide thumbs
Also See for NC373m - PCI Express Dual Port Multifunction Gigabit Server Adapter:
- User manual (23 pages) ,
- Frequently asked questions (4 pages) ,
- Release note (1 page)
Related Manuals for HP NC373m - PCI Express Dual Port Multifunction Gigabit Server Adapter
Summary of Contents for HP NC373m - PCI Express Dual Port Multifunction Gigabit Server Adapter
-
Page 1: User Guide
HP ProLiant Accelerated iSCSI for Linux User Guide Part Number 538529-001 March 2009 (First Edition) - Page 2 © Copyright 2007, 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
-
Page 3: Table Of Contents
Installing the Linux iSCSI offload bnx2i driver....................7 Linux iSCSI offload bnx2i driver limitations ..................8 Uninstalling the HP Linux iSCSI offload bnx2i driver RPM package ............8 Linux iSCSI offload bnx2i driver messages....................8 Installing the license for embedded adapters....................10 Red Hat............................ -
Page 4: Overview
The HP iSCSI protocol transports block-level storage requests of TCP connections over IPv4 and IPv6. Using the iSCSI protocol, systems can connect to remote storage and use it as a physical disk although the remote storage provider or target may actually be providing virtual physical disks. HP Accelerated iSCSI supports all targets that are certified and supported by Linux software. - Page 5 HP NC532m Dual Port Flex-10 10GbE Multifunction BL-c Adapter • HP NC532i Dual Port 10GbE Multifunction BL-c Adapter* * Requires an HP ProLiant Accelerated iSCSI license to enable acceleration iSCSI targets. All iSCSI targets supported by the Linux software initiator are supported by HP. Overview 5...
-
Page 6: Installation And Configuration
Click HP NC-Series iSCSI Offload Driver for Linux. Click download and save the HP SoftPaq (sp#####.exe) file to a directory on your hard drive. The SoftPaq file is a self-extracting executable with a file name based on the SoftPaq number. -
Page 7: Installing The Linux Iscsi Offload Bnx2I Driver
Verify that the old netxtreme2 package has been removed as follows: # rpm -q netxtreme2 Verify if a old version of bnx2 or bnx2x is loaded into the kernel and remove it, if needed, as follows: If you are installing the package over the network, it is not necessary to remove the modules. This step is only necessary if you are doing the upgrade on the physical console and you want the new drivers to take over immediately. -
Page 8: Linux Iscsi Offload Bnx2I Driver Limitations
The current version of the driver has been tested on 2.6.x kernels beginning with the 2.6.18 kernel. The driver may not compile on kernels older than the 2.6.18 kernel. SLES10 SP1 is an exception. It also runs on the 2.6.16.46 kernel because SUSE upgraded the iscsi_transport kernel module to support offload initiators in SLES10 SP1. - Page 9 Most systems are set to level 6 by default. To include debug-level messages, set the level to 7. The following sample messages are the most common bnx2i driver messages that may be logged in the file /var/log/messages. • bnx2i driver signon Broadcom NetXtreme II iSCSI Driver bnx2i v1.0.30 (Sep 29, 2007)
-
Page 10: Installing The License For Embedded Adapters
- invalid TTT bnx2i: iscsi_warning - invalid DataSN bnx2i: iscsi_warning - invalid LUN field The driver must be configured for some violations to be reported as a warning instead of as a critical error. • Driver puts a session through recovery conn_err - hostno 3 conn 03fbcd00, iscsi_cid 2 cid a1800 •... -
Page 11: Red Hat
Add the license key using the following command: /opt/hp/hp-pel/nalicense -a license_string If you have an old license and want to add a new license, just add the new license. You cannot delete the old license. Check the status of all currently installed licenses on the system using the following command: /opt/hp/hp-pel/nalicense -d [-l <logfile>]... -
Page 12: Reporting Iscsi Offload Status
Configured reports YES when the iSCSI capable LOM MAC is entered in the hp-p bl.conf file and is reported as NO if it was not entered in the hp-pbl.conf file. An error message is entered in the hp-pbl.log file if the iSCSI capable LOM MAC is not entered correctly in the hp-pbl.conf file. -
Page 13: Troubleshoot Known Issues For Hp Port-Based Linux Iscsi Offload
DATE is the current date stamp in the format Sat Feb 17 12:54:35 CST 2007. TEXT is free form text that may or may not exist in every message. Lines that do not start with a tag are a continuation of the previous line. -
Page 14: Uninstalling The License For Hp Port-Based Linux Iscsi Offload
Make sure your hard-copy ProLiant packaging license strings are available before removing this package. You can obtain the license strings by displaying all licenses on the system using the check the status of all currently installed licenses on the system command: /opt/hp/hp-pel/nalicense -d [-l <logfile>]... -
Page 15: Sles
Start the iscsi daemon using the following command: #/etc/init.d/iscsi start Uninstalling the HP NC-Series iSCSI offload initiator utilities for Red Hat If you need to uninstall the HP NC-Series iSCSI offload initiator utilities for Red Hat, use the following command: # rpm -e iscsi-initiator-utils-<version>... -
Page 16: Loading The Linux Iscsi Offload Bnx2I Module
Loading the Linux iSCSI offload bnx2i module After installing the Linux iSCSI Offload bnx2i driver and the iSCSI Offload Initiator utilities for Red Hat or SLES, use the following command to load the Linux iSCSI Offload bnx2i module: # modprobe bnx2i... -
Page 17: Binding The Iscsi Target
By default the open-iscsi daemon connects to discovered targets using the software initiator with transport name = tcp. To offload iSCSI connections, you must change the transport binding of the iSCSI node by completing the following steps. Discover targets at a specified IP address using the following command: # iscsiadm --mode discovery --type sendtargets --portal <ipaddr[:port]>... -
Page 18: Connecting To The Iscsi Target
Connecting to the iSCSI target Sample commands to discover targets and create iSCSI connections • Add static entry # iscsiadm -m node -p <ipaddr[:port,TPGT]> -T <iqn.targetname> -o new • iSCSI target discovery using 'SendTargets' # iscsiadm -m discovery --type sendtargets -p <ipaddr[:port]> •... -
Page 19: Acronyms And Abbreviations
Acronyms and abbreviations host bus adapter iSCSI Internet Small Computer System Interface Red Hat Package Manager SLES SUSE Linux Enterprise Server Acronyms and abbreviations 19... -
Page 20: Index
8, 14, 15 discovering targets 18 downloading files 6 Executing the bnx2id application 16 HP NC-Series iSCSI offload initiator utilities 14, 15 HP ProLiant Licensing 11, 12, 14 installation and configuration 6 installing bnx2, bnx2i, and bnx2x drivers 6, 7...