Table of Contents
Advertisement
Chapter 2
3.
Insert a screw into each hole and leave 3 mm
(0.12 inches) of its head exposed.
4.
Maneuver the Powerline Adapter so the two wall-
mount slots line up with the two screws.
5.
Place the wall-mount slots over the screws and slide
the Powerline Adapter down until the screws fit snugly
into the wall-mount slots.
60 mm
Wall Mounting Template
Print this page at 100% size, and cut along the dotted line.
Check the template's accuracy by measuring the distance
between the wall-mount slots with a ruler. This distance
should be 60 mm. Then place the template on the wall to
drill precise spacing.
Powerline Network Adapter
Product Overview
5
Advertisement
Table of Contents
