Introduction - Belkin F5U402-03IN-KIT User Manual

Introduction

Congratulations and thank you for purchasing the In-Desk
USB Hub. The Hub provides four downstream USB ports
that offer backward-compatible, Plug-and-Play connectivity
with all USB devices, including USB 1.1 (low- and full-speed)
and USB 2.0 (high-speed) devices. This includes such
peripherals as scanners, printers, mass-storage devices, and
high-resolution cameras. The Hub is self-powered, which
allows the cascading of devices with additional hubs so that
up to 127 USB devices may be connected to a single port.
The Hub fits into an included 2- or 3-inch mounting ring, for
discreet placement into your desk.
Note: If your desk does not have a pre-drilled hole in it, you
can drill one yourself using a 2- or 3-inch hole saw (requires
separate purchase, not from Belkin).
Note: When the Hub is connected to a USB 1.1 host
controller, the maximum USB 1.1 bandwidth of 12Mbps
must be shared by all four ports.
1
1 1
2 2
3 3