Wps (Easy Setup Button) - Airlink101 AWLH5075 User Manual

Wireless n 150 pci adapter

Hide thumbs Also See for AWLH5075:

Table of Contents

4.6 WPS (Easy Setup Button)

WPS is a new and easy way to configure the encryption for your wireless network

clients. In order to use it, you need to have a router that supports this feature, like the

AR675W Airlink101 Wireless N 300 Green Router or AR570W Wireless N 150 Router.

You also need to configure the wireless encryption on the router; you should find the

instructions for configuring it in the router User Manual. If your wireless router does not

support WPS, you will need to set up the wireless security manually and you can skip

this section.

We are using the AWLH5075 Wireless N 150 PCI Adapter and AR675W Airlink101

Wireless N 300 Router to illustrate the following setup instructions.

Open the Airlink101 Wireless Monitor. Click the WPS tab.

Step 1

Choose your configuration method:

- For Pin Input method, write down the Pin Code on a piece of paper then click PIN

button, continue to Step 2a

Pin Code

- For Push Button method, click PBC button, or push the Easy Setup Button (WPS

Button) on the PCI card for 3 seconds. Continue to Step 3a.

Table of Contents