Member's Mark G32903 Assembly Instructions & User Manual
  1. Manuals
  2. Brands
  3. Member's Mark Manuals
  4. Griddle
  5. G32903
  6. Assembly instructions & user manual
Member's Mark G32903 Assembly Instructions & User Manual

Member's Mark G32903 Assembly Instructions & User Manual

22” tabletop gas griddle
Hide thumbs
Table of Contents

Advertisement

Quick Links

22" Tabletop GAS GRIDDLE
Assembly Instructions & User Manual
Model G32903
Quick Start Video
Scan this QR code.
STOP
DO NOT RETURN PRODUCT TO STORE
Technicians are available to assist with your product needs. For assembly assistance, technical questions, missing
parts or general help, please contact us toll-free:
1-833-454-0864
WARNING
Installer/ Assembler
The instruction manual contains important information necessary for the proper assembly and safe use of the appliance.
Read and follow all warnings and instructions before assembling and using the appliance.
Follow all warnings and instructions when using the appliance.
FOR OUTDOOR USE ONLY. NOT FOR COMMERCIAL USE.
IF STORED INDOORS, DETACH AND LEAVE CYLINDER OUTDOORS.
Manual Revision #: 09.12.2023

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G32903 and is the answer not in the manual?

Questions and answers

John Tholl
February 27, 2025

What Type of surface should the grill be operated on

0
1 comments:
Mr. Anderson
February 27, 2025

The Member's Mark G32903 griddle should be operated outdoors in a well-ventilated area, with a minimum clearance of 24 inches from combustible materials such as walls, siding, windows, and fencing. It must not be used under any overhang, siding, or other combustible material, and it should not be used on a boat, recreational vehicle, or in enclosed spaces like a carport, garage, porch, or covered patio.

This answer is automatically generated

0

Related Manuals for Member's Mark G32903

Summary of Contents for Member's Mark G32903

  • Page 1 22” Tabletop GAS GRIDDLE Assembly Instructions & User Manual Model G32903 Quick Start Video Scan this QR code. STOP DO NOT RETURN PRODUCT TO STORE Technicians are available to assist with your product needs. For assembly assistance, technical questions, missing...
  • Page 2 IMPORTANT SAFETY WARNINGS CAUTION Read and follow all safety statements, assembly instructions, use and care directions before attempting to assemble and cook. INSTALLER OR ASSEMBLER/CONSUMER This manual should be kept with the griddle at all times. DANGER • Never operate this appliance unattended. •...
  • Page 3 CAUTION IN DIRECT SUN, AND IN OPERATION, YOUR GRIDDLE’S STAINLESS STEEL AND PAINTED STEEL PARTS CAN BECOME VERY HOT. WARNING • This appliance is not intended for and should never be used as a heater. • The cylinder must be disconnected when the appliance is not in use. •...

  • Page 4: Table Of Contents

    MODEL G32903 TABLE OF CONTENTS: Installation Safety Setting Up Gas Hook-Ups And Warnings Safety Hose And Regulator Parts List & Exploded Diagram Assembly Instructions Leak Test Procedure Leveling Your Griddle Lighting Instructions Shut Down Procedure Prevention Seasoning And Griddle Care...

  • Page 5: Installation

    MODEL G32903 INSTALLATION INSTALLATION Installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling for Recre- ational Vehicles, ANSI A 119.2/NFPA 1192, and CSA Z240 RV Series, Recreational Vehicle Code, as applicable.

  • Page 6: Safety

    MODEL G32903 SAFETY CARBON MONOXIDE HAZARD This griddle is a combustion appliance. All combustion appliances produce carbon monoxide (CO) during the combustion process. This product is designed to produce extremely minute, non-hazardous amounts of CO if used and maintained in accordance with all warnings and instructions. Do not block air flow into or out of the griddle.

  • Page 7: Setting Up

    MODEL G32903 SETTING UP Where to Setup Your Griddle WARNING • For outdoor use only, in a well-ventilated area. • Minimum clearance to adjacent combustible materials. • MUST have a clearance of 24” on all sides from a dwelling, walls, aluminum siding, windows, fencing, and any other combustible material.The appliance shall not be located or...

  • Page 8: Safety Hose And Regulator

    MODEL G32903 GAS HOOK-UP’S AND WARNINGS DANGER • NEVER store a spare LP gas cylinder/bottle near the appliance. • DO NOT store a LP gas cylinder in an area where children play. • LP gas cylinder should only be stored outside and in a cool dry place.
  • Page 9 MODEL G32903 SAFETY HOSE AND REGULATOR Connecting Regulator to the LP Gas Cylinder Turn all control knobs to the “OFF” position. Shut off valve 2. Turn LP gas cylinder “OFF” by turning hand-wheel clockwise to a full stop. 3. Remove the protective cap from LP gas cylinder valve. Always use cap and strap supplied with valve.
  • Page 10 MODEL G32903 SAFETY HOSE AND REGULATOR 8. Wait approximately 5 seconds for the hose and regulator pressure to stabilize (to prevent the flow limiting device feature from being re-activated). 9. Turn the ignition burner control knob, to the “HI” position.
  • Page 11 MODEL G32903 PARTS LIST Key Qty Description Part No. Key Qty Description Part No. Griddle Top G329-1200-C1 Control Knob Bezel G329-0503-C1 Hex Nut, Griddle G329-1101-C1 Control Knob G561-0007-C1 Grease Cup G329-0900-C1 Burner Box Assembly G329-0200-C1 Match Holder G329-0002-C1 Burner Box Feet...

  • Page 12: Assembly Instructions

    MODEL G32903 ASSEMBLY INSTRUCTIONS ASSEMBLY MANUAL 1-833-454-0864...
  • Page 13 MODEL G32903 ASSEMBLY INSTRUCTIONS ASSEMBLY MANUAL 1-833-454-0864...
  • Page 14 MODEL G32903 ASSEMBLY INSTRUCTIONS ASSEMBLY MANUAL 1-833-454-0864...
  • Page 15 MODEL G32903 ASSEMBLY INSTRUCTIONS IMPORTANT: Do not discard the safety cover. ASSEMBLY MANUAL 1-833-454-0864...
  • Page 16 MODEL G32903 ASSEMBLY INSTRUCTIONS CONNECTING A 1 LB LP GAS CYLINDER NOTE: The 1 lb LP gas cylinder is sold separately. ASSEMBLY MANUAL 1-833-454-0864...
  • Page 17 MODEL G32903 ASSEMBLY INSTRUCTIONS CONNECTING TO A 20LB LP GAS CYLINDER WARNING: Always perform a leak test before lighting the griddle. WARNING 12" 0.3m ASSEMBLY MANUAL 1-833-454-0864...

  • Page 18: Leak Test Procedure

    MODEL G32903 LEAK TEST PROCEDURE A leak test is used to determine the integrity of a seal. Before using your gas griddle, perform a leak test on the connection between the regulator and the gas cylinder to reduce the risk of serious bodily injury or death from fire or explosion.

  • Page 19: Leveling Your Griddle

    MODEL G32903 LEVELING YOUR GRIDDLE Leveling Your Griddle Leveling your griddle will ensure proper flow of grease on the griddle top, into the grease cup. a. Choose the griddle location. b. Use a level to determine if any adjustments are required.

  • Page 20: Lighting Instructions

    MODEL G32903 LIGHTING INSTRUCTIONS LIGHTING INSTRUCTIONS: 1 LB LP GAS CYLINDER Set your griddle on a sturdy flat surface and confirm that all control knobs are in the “OFF” position. For outdoor use only. 2. Select a burner control knob. Push in and turn the control knob counter-clockwise to the “HI” position. Press the ignition button for 3 to 5 seconds.

  • Page 21: Shut Down Procedure

    MODEL G32903 LIGHTING INSTRUCTIONS WARNING Never stand with your head directly over the griddle during lighting to prevent bodily injury. Multiple attempts at lighting burners could result in a build-up of gas causing flash flames. If you are having trouble lighting the burners, refer to the troubleshooting section of this manual (Pages 32 and 33).
  • Page 22 MODEL G32903 LIGHTING INSTRUCTIONS SHUT DOWN PROCEDURE: 20 LB LP GAS CYLINDER Push in and turn control knobs to the “OFF” position. 2. Close the LP gas cylinder shut-off valve. 3. Disconnect the pressure regulator. WARNING If regulator frosts, turn off the griddle and LP cylinder valve immediately. This indicates a problem with the cylinder and it should not be used on any product.

  • Page 23: Prevention

    MODEL G32903 PREVENTION BURNER FLAME PATTERN Your griddle's burners are designed to mix oxygen and propane at a rate that allows for optimal flames. Should the burner holes, air shutter, or venturi get blocked, it will affect the propane and air mixture, causing low or inconsistent flames, or flames coming from the air gate.
  • Page 24 MODEL G32903 PREVENTION Flash-Back Fires Blockages in the burner venturi caused by spiders, insects and nests can cause a flashback fire. A flashback fire occurs when a blockage in the venturi tubes caused by spiders, insects and nests blocks the flow of gas, forcing it back towards the control panel and control knob.

  • Page 25: Seasoning And Griddle Care

    MODEL G32903 SEASONING AND GRIDDLE CARE What is seasoning? Seasoning is the process of applying multiple coatings of oil to the griddle surface, heating to a high temperature, to bake the oil into the griddle top. Seasoning your griddle top improves the cooking performance, create a non- stick surface for cooking, prevents damage and deterioration due to moisture and humidity, and extends the life of your griddle.
  • Page 26 MODEL G32903 SEASONING AND GRIDDLE CARE With continued use of your griddle, the seasoning bond will get better and better. Applying a coating of oil at the start and finish of each cook, will help to maintain seasoning. Never use soap to clean the griddle, this will destroy the seasoning.

  • Page 27: Care And Maintenance

    MODEL G32903 CARE AND MAINTENANCE CLEANING YOUR GRIDDLE At the end of every cook and before storing your griddle, cool griddle below 300°F (150°C). Scrape any food debris using a spatula or straight metal scraper. 2. Wipe griddle surface with paper towel.
  • Page 28 MODEL G32903 CARE AND MAINTENANCE BURNERS & BURNER BOX MAINTENANCE Although your griddle’s burner box is fully protected from grease and other build-up that can accumulate during cooking, regular checks of the burners and ignition electrode are still required to ensure proper performance, safety and a longevity of your griddle.
  • Page 29 MODEL G32903 CARE AND MAINTENANCE GENERAL GRIDDLE SAFETY TIPS ALWAYS turn the control knobs and LP gas cylinder “OFF” when not in use. 2. Do not leave griddle unattended at any time while in operation. 3. If the griddle surface and components have not been regularly maintained or safely checked, take extreme caution at first lighting, during preheat and when cooking at high temperatures.

  • Page 30: Start Grilling

    MODEL G32903 START GRILLING WARNING Always observe safe food handling and safe food preparation practices when using this griddle, to prevent food-borne illnesses. WARNING To ensure that it is safe to eat, food must be cooked to the minimum internal temperatures listed in the table below.
  • Page 31 WARNING: HOT SURFACES WARNING EXTERIOR SURFACES WILL BECOME VERY HOT. TO AVOID BURNS, ALWAYS WEAR INSULATED PROTECTIVE GRILLING MITTS WHEN WORKING AT THE GRIDDLE. • KEEP AWAY FROM COMBUSTIBLE MATERIALS • KEEP CHILDREN AND PETS AWAY FROM THIS GAS FIRED APPLIANCE •...

  • Page 32: Troubleshooting

    MODEL G32903 TROUBLESHOOTING PROBLEM POSSIBLE CAUSES SOLUTION Electrode should be positioned 1/8" to 1/4" Electrode misaligned. away from the burner tube. Burner will not light (can ignite with a Electrode ceramic piece is damaged. Replace electrode. match) Faulty Ignition. Contact Customer Support: 1-833-454-0864 Burners are not properly seated over valve orifices.
  • Page 33 MODEL G32903 TROUBLESHOOTING PROBLEM POSSIBLE CAUSES SOLUTION Out of propane. Replace LP gas cylinder. Burner and/or burner tubes are blocked. Clean burners. Decreasing heat, “popping sound” Regulator flow limiting device activated either by improper lighting, opening control knobs too Reset the pressure regulator.

  • Page 34: Warranty And Service

    MODEL G32903 WARRANTY AND SERVICE This product is covered by the Sam's Club Member Satisfaction Guarantee. Please visit samsclub.com for more information. BEFORE YOU CALL FOR SERVICE, have the following information available: 1. Serial Number: Located on the CSA rating label.
  • Page 35 MODEL G32903 WARRANTY AND SERVICE EXCLUSIONS Winners Products Engineering Ltd. excludes from its warranty, the following: Winners Products Engineering Ltd. excludes from its warranty, the following: Failure to perform regular maintenance, safety checks and service, including (but not limited to) removal of insects from venturi tubes, resulting in a flashback fire, damage caused by grease fires, flare-up fires or fires resulting from improper connection of hose to gas source.
  • Page 36 Distributed by Sam’s West lnc. QUESTIONS OR COMMENTS? We would love to hear about your Member's 2101 SE Simple Savings Dr.Bentonville, Mark experience! Visit us at: Arkansas 72716-0745 samsclub.com/membersmarkhelp Made In China linktr.ee/member's.mark Winners Products Engineering Ltd 27/F, Cofco Tower, 262 Gloucester Road, CONTACT US: 1-833-454-0864 Causeway Bay, Hong Kong...

Table of Contents