Figure 3-3 Access The Download Page - StarFive JH-7110 DevKit Quick Start Manual

1. After entering the system, flash the image to the SD card, and restart the system after the
flash is completed.
2. Execute the following command to start JH-7110 DevKit using sdcard.img:
sudo dd if=sdcard.img of=/dev/sdX bs=4096 && sync
3.2.2.4. Run Debian System
Follow the steps below to run Debian System:
1. Click to download
Note:
If a security prompt appears after clicking on the link, please click "Advanced" and
then click "Continue Access" to enter the SDK download page.

Figure 3-3 Access the Download Page

2. Execute the following command to run Debian system:
sudo dd if=xxx.img of=/dev/sdX bs=4096 && sync
Note:
xxx refers to the version of the Debian image, for example, v3.9.3.
21
the Debian image.
© 2018-2024 StarFive Technology
All rights reserved
| 3 - Getting Started
www.starfivetech.com