Getting Started; Download The Sdk; Table 3-1 Pre-Build Image And Binaries - StarFive JH-7110 DevKit Quick Start Manual

3. Getting Started

This chapter provides steps to get started with JH-7110 DevKit. It builds U-Boot SPL, U-Boot and a
flattened image tree (FIT) image with a Opensbi binary, linux kernel, device tree, ramdisk image and
rootfs image for the JH-7110 DevKit board.
The SDK of JH-7110 DevKit contains the following part:
• Pre-build images
• U-Boot Binaries
• Source Code

Table 3-1 Pre-build Image and Binaries

File
Image.fit
Image.gz
initramfs.cpio.gz
devkits_fw_payload.img
u-boot-spl.bin.normal.out
sdcard.img
dtb files
starfive-jh7110-xxx-eMMC-mini-
mal-desktop-wayland.img.bz2
starfive-jh7110-xxx-SD-mini-
mal-desktop-wayland.img.bz2

3.1. Download the SDK

Click to download the StarFive JH-7110 DevKit SDK.
15
Description
FIT image (kernel/dtb/initramfs)
Kernel compressed image file
Root filesystem based on ram
OpenSBI binaries with u-boot as payload
SPL binary
SD card/eMMC image including SPL/U-Boot/
Kernel/FS
Device tree binary
Debian image (using eMMC)
Debian image (using SD card)
© 2018-2024 StarFive Technology
All rights reserved
www.starfivetech.com