Page 1
ITEM #4872526 16 IN PEDESTAL FAN UTILITECH and logo design are MODEL #SP8-6RR trademarks or registered trademarks of LF, LLC. All rights reserved. Español p. 7 ATTACH YOUR RECEIPT HERE Serial Number __________________ Purchase Date_________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 866-994-4148, 8 a.m.
PACKAGE CONTENTS Cross Base Bar B SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1.
REPLACEABLE FUSE User Servicing Instructions Fuse 1. Unplug your fan. Grasp plug and remove from the receptacle or other outlet device. Fuse cover Do not unplug by pulling on cord. 2. Open fuse cover, located on the top of the plug, by using your thumb or a flat head screwdriver to slide the cover down toward the prongs.
ASSEMBLY INSTRUCTIONS 4. Remove the Rear Grille Mounting Nut (E) from the Motor Housing (G) (turning counterclockwise). 5. Set the Rear Grille (F) in the proper position (carry handle up) on the Motor Housing (G). Make sure that the holes on the Rear Grille (F) fit into the pegs on the Motor Housing (G).
CARE AND MAINTENANCE This appliance requires little maintenance and contains no user serviceable parts. Do not try to fix it yourself. Refer it to qualified service personnel if servicing is needed. This fan is permanently lubricated and will not require additional lubrication for the life of the fan. TO CLEAN: Before cleaning, turn fan off and unplug from electrical outlet.
Page 7
ARTÍCULO #4872526 40,64 CM DE DIÁMETRO UTILITECH y el diseño del logotipo VENTILADOR son marcas comerciales o marcas registradas de LF, LLC. Todos los DE PEDESTAL derechos reservados. MODELO #SP8-6RR ADJUNTE SU RECIBO AQUÍ Número de serie ________________ Fecha de compra________________ ¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame...
TABLA DE CONTENIDO CONTENIDO DEL PAQUETE ..........................INFORMACIÓN DE SEGURIDAD........................... ENCHUFE POLARIZADO............................CONSEJOS DE SEGURIDAD DEL CABLE DE ALIMENTACIÓN................INSTRUCCIONES DEL ENCHUFE Y EL CABLE DE ALIMENTACIÓN..............PREPARACIÓN............................... INSTRUCCIONES DE ENSAMBLAJE........................INSTRUCCIONES DE FUNCIONAMIENTO......................CUIDADO Y MANTENIMIENTO..........................UN AÑO DE GARANTÍA LIMITADA......................... CONTENIDO DEL PAQUETE PIEZA DESCRIPCIÓN...
CONTENIDO DEL PAQUETE PIEZA DESCRIPCIÓN CANTIDAD Barra base trasversal B INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. Cuando utilice electrodomésticos, siempre tome medidas de precaución básicas para reducir el riesgo de incendios, descargas eléctricas y lesiones personales, incluidas las siguientes: 1.
INSTRUCCIONES DEL ENCHUFE Y EL CABLE DE ALIMENTACIÓN Este producto posee protección contra sobrecargas (fusible). Un fusible fundido indica que se ha producido una sobrecarga o un cortocircuito. Si el fusible se funde, desenchufe el producto del tomacorriente. Reemplace el fusible según las instrucciones de mantenimiento para el usuario (consulte las etiquetas del producto para instalar el tipo de fusible adecuado) y verifique si el producto funciona.
INSTRUCCIONES DE ENSAMBLAJE 3. Inserte la parte de conexión de la carcasa del motor (G) en la parte superior del poste de altura ajustable (K). Si gira el la parte de conexión de la carcasa del motor (G) mientras empuja, se asegurará de que el carcasa del motor (G) esté...
Ajustar la altura del ventilador Afloje la perilla de ajuste de altura (colocada en el pilar) en dirección contraria a las manecillas del reloj, ajuste la longitud del poste de altura ajustable y apriete la perilla de ajuste de altura en dirección de las manecillas del reloj. PRECAUCIÓN: el ventilador se debe apagar antes de realizar este ajuste.
Need help?
Do you have a question about the SP8-6RR and is the answer not in the manual?
Questions and answers