I N S T A L L A T I O N; Components Of The Htx Claus Thermal Reactor Thermocouple System - Delta Controls HTX Installation, Operation & Maintenance Manual

I N S T A L L A T I O N

1.

Components of the HTX Claus Thermal Reactor Thermocouple System

The following listed components, referenced in this manual, are required for proper installation of the HTX.
Failure to utilize these Components will reduce the life of the HTX and cause possible failure.
HTX
Thermocouple for
Refractory
Sulfur Processing
Thermowell
Service
Thermocouple The large
assembly with refractory
mounting flange, thermowell collar
body, flush
connections, the refractory
terminal and protects
enclosure housing the primary
and primary thermowell.
thermowell.
4
NOTE
info
A brief video presentation of the steps of the
complete HTX installation may be found at
www.claustemp.com.
HRW HNP
Refractory Nozzle
Packing Kit
Rigid and
compressible
disks for proper
rests in insulation of
the nozzle, and
is designed
to prevent the
buildup of sulfur in
the nozzle.
Components of the HTX Claus Thermal Reactor Thermocouple System
HFS
Flush Gas Horizontal
Station Mounting Bars
(usually shipped (usually shipped
separately) separately)
Includes flow Bars are used
indicator, flow to reliably install
control valve, thermocouple(s)
pressure in non-vertical
regulator, filter, nozzles.
dripwell, and
gauge on stainless
steel panel with
mounting
hardware.
HMB HRG
Refractory Drilling
System
(usually shipped
separately)
Creates straight,
centered, and
perpendicular
bore hole through
the refractory.