Subscribe to Our Youtube Channel
Related Manuals for ZKTeco Rots-3
Summary of Contents for ZKTeco Rots-3
- Page 1 Installation Guide Rots-3 Stand Version: 1.0 Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.
- Page 2 Dimensions Top View Bottom View Wiring Hole Back Plate Mounting Holes Side View Wiring Hole 2.224"(56.5mm) Adjustable Angle: Vertical 20° 1.969"(50.0mm) Horizontal 180° Wall Mounting Holes Wiring Hole 3.189"(81.0mm) 3.465"(88.0mm)
-
Page 3: Installation Diagram
Installation Diagram Back Plate Wiring Hole Hexagon Socket Screws Adjusting Nut Bottom Cover Wiring Hole... - Page 4 How to put the cables through the wire holes？ Step 1: Remove the three screws from the bottom cover with a Phillips screwdriver. Step 2: Remove the bottom cover. Step 3: Pass the cables through the wire holes before you put the back plate on the base. Step 4: Put the cable through the wire hole and then install the bottom cover agian with the screws.
- Page 5 How to install the mounting bracket on the wall? Step 1: Drill four mounting holes at suitable locations on the wall. The recommended height from the ground is 1.5 meters, which can be adjusted according to the actual situation. Step 2: Fix the mounting bracket on the wall using four wall mounting screws. Anchor Percussion Drill Screw...
- Page 6 How to connect the device with the mounting bracket? Step 1: Pass the cables through the back plate. Step 2: Identify the correct mounting holes and x the back plate on the mounting bracket using the countersunk screws. Step 3: Connect the cable to the device before attach the device to the back plate. Step 4: Attach the device to the back plate with a security screw.
- Page 7 Please choose di erent mounting holes for fastening the device according to the back plate of compatible models as shown below: e.g. ProFace X Mark the holes that can be used for installation Rots-3 Stand SpeedFace-V4L SpeedFace-V4LM1 Rots-3 Stand Rots-3 Stand...
- Page 8 SpeedFace-V3L SpeedFace-V5/V5L Rots-3 Stand Rots-3 Stand Elite Series Rots-3 Stand NOTE: The location shown above is for reference only, choose the mounting holes based on the physical object.
- Page 9 ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com Copyright © 2023 ZKTECO CO., LTD. All Rights Reserved.
Need help?
Do you have a question about the Rots-3 and is the answer not in the manual?
Questions and answers