ZKTeco ZKIWBA01B Installation Manual

Translated from Spanish to English - www.onlinedoctranslator.com
Mobile Stand Installation Guide
· To ensure correct and safe use, please read
carefully this manual before installation.
· It is recommended to equip this model with a 55 to 86
inch interactive whiteboard.
· The maximum weight of the bearing can support up to 100 kg.
Packing list
A - Left bracket 1 piece
B - Right bracket 1 piece
Cross Slotted Recessed Hex Head Screw
Spring cushion M12
M6 screw*
Phillips Screwdriver (User Prepared)
Adjustable Wrench (Prepared by user)
Note: "*" Indicates that due to differences in models, some models include this accessory, please refer to the
current one.
C - Wall bracket 1 piece E - Wheels 4 pieces
D - Tray 1pc
F - Bar for hanging on the wall 2 pieces*
M8×25mm
14 pieces
∅20×∅13mm
4 pieces
M6×130mm
2 pieces
1 pc
1 pc
Installation steps
Version: 1.1
Step 1
Adjust the wheel to the brake state and screw it into
the brackets (as Figure 1).
Adjust the wheel to
the braking state
before the operation.
Figure 1
Step 3
Attach the right bracket to the other end of the bracket.
wall (as shown in Figure 3).
one
figure 3
Step 2
Attach the Wall Bracket to the Left Bracket (as
Figure 2), 3 sets of mounting heights (1 & 4, 2
& 5, 3 & 6), optional on demand.
one hole position
of support
two
3
4
5
6
one
Wall Bracket Hole Suggestions
Compatible models matching holes
55" 3, 6
2, 5
65" - 70"
1, 4
75" - 86"
Front of
Front of
Figure 2
Step 4
Installing the tray between the two
supports (as in Figure 4).
First insert the
tray in the
positioning pin
on the stand
adjust the
tray in the
positioning
bolts
one
hold everything
the bolts
Figure 4