Advertisement
Quick Links
Advertisement
Related Manuals for ring Stick Up Cam Elite
Summary of Contents for ring Stick Up Cam Elite
- Page 1 Stick Up Cam Elite ENGLISH 02_Stick_Up_Cam_Elite_MANUAL_FR-CA_EN.indd 1 9/26/19 12:42 PM...
- Page 2 1. Set up your Download the Ring app. The app walks you through setting up and managing Stick Up Cam Elite. your Stick Up Cam Elite. Search for “Ring” in one of the app stores below, or visit: ring.com/app Download from Windows Store Grab your Wi-Fi password.
- Page 3 Let’s get your Stick Up Cam ready. Powering your Stick Up Cam Stick Up Cam connects using Power over Ethernet (or PoE). First, slide off the bottom cover. This lets you use one cable for both power and internet. Most Ethernet equipment does not provide PoE, so we’ve included a PoE Adapter.
- Page 4 Ethernet Switch, or Hub the in-app instructions. Try it out! After setup, tap the Live View Power Outlet button in the Ring app to see live video from your Stick Up Cam. PoE Adapter Blue light flashing? Once you connect the PoE Adapter to power and Ethernet, if the light on the adapter If the light on the front of your Stick Up Cam is flashing after turns green, all is well.
-
Page 5: Choose A Location
2. Install your How to use Stick Up Cam on a table or shelf: Stick Up Cam Elite. Choose a location. Make sure that your Ethernet cable has been routed Stick Up Cam is happy just about anywhere, indoors or out. - Page 6 How to install Stick Up Cam on a wall: Remove the plastic cover and Push the rubber pad rubber pad from the base. back into the base. You’ll put the cover back on once The rubber pad should sit you’ve mounted your between your wall and the Stick Up Cam.
- Page 7 How to install Stick Up Cam on a ceiling: Remove the plastic cover Drive the screws. from the base. Hold the round part of the base against your ceiling, rubber-side down. Then mount it with the included screws. You’ll put the cover back on once you’ve mounted your Stick Up Cam.
- Page 8 Final steps for wall or ceiling mounting: Close it up. Snap the cover back onto the base. Make sure that your Ethernet cable has been routed through Then, secure it with the included security screw, using the the hole in the bottom cover and is plugged into your Stick star-shaped end of the included screwdriver bit.
- Page 9 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. © 2019 Ring LLC or its affiliates. Ring and all related logos are trademarks of Ring LLC or its affiliates. Last updated: 09/26/19 02_Stick_Up_Cam_Elite_MANUAL_FR-CA_EN.indd 16...
Need help?
Do you have a question about the Stick Up Cam Elite and is the answer not in the manual?
Questions and answers