Table of Contents
Advertisement
STOPPING THE MACHINE DURING AN EMERGENCY
To stop the Triminator in an emergency, press the EMERGENCY STOP button.
DISCONNECT POWER CORDS
Disconnect the trimmer's power cord.
NOTICE
Be sure to hold the plug when disconnecting the power cord from the electrical outlet. Do not
disconnect by pulling on the power cord.
TRIMMING PLANT MATERIAL
LOAD
Remove the clear end cap from the rear of the drum. Retract the pivot handle and
pivot the drum into an angled loading position. Load dried, prepared, untrimmed
plant material into the drum. For best efficiency run batches of similar material.
RUN
Retract the pivot handle and pivot the drum into a horizontal position. Turn
machine ON and
allow to run for 1-10 minutes. Check material every 1-3 minutes. For a closer trim,
continue running the Triminator XL until desired trim is accomplished.
Triminator XL Dry Trimmer User Guide
14
Advertisement
Table of Contents
Need help?
Do you have a question about the XL DRY and is the answer not in the manual?