Triminator XL DRY Quick Start Manual

QUICK START GUIDE
STEPS THAT WILL MAKE YOUR LIFE EASIER AND THE END PRODUCT BETTER WHILE USING
IDEAL PLANT MOISTURE LEVEL 9-10%
BEND STEM
Snap sound?
••••••••••••
No snap sound?
••••••••••••
Squeeze a bud between
your fingers, lightly.
Crumbles? Too dry
Note: Bud that is too moist will smear on drum and result in poor trim quality.
Environment: Low humidity spaces and cool rooms are the ideal environment to
operate the machine.
AS CLOSE AS
POSSIBLE TO BUD
FILL MACHINE
Fill drum 1/2 to 2/3 of the way full.
Overfilling will lower quality of trim
and slow processing time.
Turn tension knob clockwise until you
encounter minor resistance.
TRIMMING TIME
TRIMINATOR XL DRY.

PREPARATION

Ideal moisture.
Too moist.
Bounces back?
Ideal dryness.
CUT STEM

OPERATION

TIGHTEN SHEAR BAND
Stays squeezed?
Too moist.
As soon as full contact between drum
and shear band is achieved, release the
tension knob.
Check trim after
3-5 minutes.
Check every 5 minutes
afterwards until desired
trim is achieved.