Page 1
Owner’s Manual Manual del Propietario Manuel d’utilisatio Benutzerhandbuch KM614FL Coaxials Altavoz Coax KM614FL KM614FL Koax-System Haut-parleurs Coaxiaux KM614FL select language seleccione el idioma choisir la langue sprache auswählen 51KM614-a...
VENTILATION. SUBWOOFERS SHOULD BE MOUNTED WITH AT LEAST 1 INCH (2.5CM) CLEARANCE BETWEEN THE FRONT OF THE SPEAKER AND ANY SURFACE. KICKER PRODUCTS ARE CAPABLE OF PRODUCING SOUND LEVELS THAT CAN PERMANENTLY DAMAGE YOUR HEARING! TURNING UP A SYSTEM TO A LEVEL THAT HAS AUDIBLE DISTORTION IS MORE DAMAGING TO YOUR EARS THAN LISTENING TO AN UNDISTORTED SYSTEM AT THE SAME VOLUME LEVEL.
Note: All specifications and performance figures are subject to change. Please visit www.kicker.com for the most current information. To get the best performance from your new KICKER speakers, we recommend using genuine KICKER accessories and wiring. Please allow two weeks of break-in time for the speakers to reach optimum performance.
Wiring Configuration We recommend using 16 gauge (or larger) wire. The KM614FL Speakers are rated at 4 ohms and work with any source unit or amplifier designed to operate at a 4 ohm load. Make sure your source unit or amplifier is rated for 4 ohm operation.
Loops for mounting with zip ties LED Wiring Configuration To control LED behavior like color selection, speed, and brightness with ease, install the KICKER KMLC (sold separately). 1. Connect the black LED wire to the positive terminal of the battery.
Page 7
b. Install a switch (not included) on the black LED wire between the fuse and the speaker, so the LED’s can be turned off. Without a switch to turn them off, they will always be on. 2.Connect the red, blue and/or green LED wires to the negative terminal of the battery.
The sound produced by the KM614FL coaxials is directional. Find the best location for stereophonic sound. If necessary, add more KM614FL coaxial speakers to the system to help distribute and balance the sound-stage.
Page 9
The KM614FL will fit in existing 5-1/4” speaker holes.After determining the best mounting locations, carefully check the areas where the mounting hardware will be placed. If a mounting location does not already exist, use the included mounting hole template to cut new holes and pre-drill the mounting screw holes using a 7/64”...
Page 10
2. Install the adhesive-backed foam strip to the inside of the back of the grille. 3. Orient the KICKER badge and grille as desired, then snap the grille onto the speaker. English...
Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction during the warranty period, KICKER will repair or replace (at its discretion) the defective merchandise with equivalent merchandise. Warranty replacements may have cosmetic scratches and blemishes.
Page 12
Service performed by anyone other than KICKER HOW LONG WILL IT TAKE? KICKER strives to maintain a goal of one-week service for all acoustics (subwoofers, midrange drivers, tweeters, crossovers, etc) returns. Delays may be incurred if lack of replacement inventory or parts is encountered.
Page 13
(“a todo volumen”) en todo sentido. La línea de altavoces y amplificadores KICKER es la mejor del mercado de audio de automóviles y por lo tanto representa el “combustible” para vivir a todo volumen en el área de “estéreos de automóvil” de la vida de nuestros clientes.
Need help?
Do you have a question about the KM614FL and is the answer not in the manual?
Questions and answers