Download Print this page

Lippert Glass Rinser Owner's Manual

Hide thumbs Also See for Glass Rinser:

Download this manual

Glass Rinser

OWNER'S MANUAL

Need help?

Do you have a question about the Glass Rinser and is the answer not in the manual?

Page 1 Glass Rinser OWNER'S MANUAL...
Page 2 The Glass Rinser is another tool from Lippert Components, Inc. to provide assistance and convenience for our customers' camping experience. This manual covers the operation of the Glass Rinser. The components may differ based on the unit’s year, make, model and floor plan, but operate in the same manner.
Page 3 The Glass Rinser base (Fig. 1) outlet should be aligned with the sink and slightly overhangs the sink edge. Be sure the supply fitting under the sink (Fig. 3) is connected to the Glass Rinser (Fig. 2) and turned to the ON position (Fig. 4A).
Page 4: Operation
If the inside of the glass is not clean, repeat the process from Step 1. NOTE: The Glass Rinser is designed to rinse and clean the inside of a glass or cup. Be sure to check the glass for residue that may be on the outside of the glass. Clean with a dish cloth, sponge or scrub pad.
Page 5 Notes Page 5 Rev: 06.07.24 CCD-0008326...
Page 6 Lippert representative has been provided. Any unauthorized use shall void any applicable warranty. The information contained in this manual is subject to change without notice and at the sole discretion of Lippert. Revised editions are available for free download from lippert.com.