Cyclades User's Guide User Manual page 265

Field Name
Log Prefix
TCP Sequence
TCP Options
IP Options
• If you selected Reject from the Target field, the following field appears:
6. Click on the OK button when done.
7. Click on "apply changes."
Web Manager for Administrators
"Reject with" means that the filter drops the input packet and sends back a
reply packet according to any of the reject types listed below.
Using tcp flags and appropriate reject type, the packets are matched with
the REJECT target. The following options are available:
• icmp-net-unreachable – ICMP network unreachable alias
• icmp-host-unreachable – ICMP host unreachable alias
• icmp-port-unreachable – ICMP port unreachable alias
• icmp-proto-unreachable – ICMP protocol unreachable alias
• icmp-net-prohibited – ICMP network prohibited alias
• icmp-host-prohibited – ICMP host prohibited alias
• echo-reply – Echo reply alias
• tcp-reset – TCP RST packet alias
Definition
The prefix that will identify the log.
Check box to include TCP sequence in the
log.
Check box to include TCP options in the log.
Check box to include IP options in the log.
Configuration
249