Related Manuals for Draper D20 08093
Summary of Contents for Draper D20 08093
- Page 1 Original Instructions Version 3 - May 2024 MULTI-TOOL BATTERY SYSTEM COMPRESSOR 08093...
-
Page 2: Copyright © Notice
All photographs and drawings within this manual are document is part of the product; retain it for the life supplied by Draper Tools to help illustrate correct of the product, passing it on to subsequent holders. operation of the product. -
Page 3: Table Of Contents
2. Contents Preface 1.1 Product Reference 1.2 Revisions 1.3 Understanding the Safety Content of This Manual 1.4 Copyright © Notice Contents Warranty Product Introduction 4.1 Scope 4.2 Specification Health and Safety Information 5.1 General Health and Safety Precautions 5.2 Additional Safety Instructions for This Air Compressor 5.3 Additional Safety Instructions for Rechargeable Batteries 5.4 Residual Risk... -
Page 4: Warranty
3. Warranty Draper power tools have been carefully tested & inspected and are guaranteed to be free from defective materials or workmanship. For details of warranty and terms and conditions please visit the Draper Tools website at www.drapertools.com/warranty – 4 –... -
Page 5: Product Introduction
4. Product Introduction 4.1 Scope Part of our core range, this product is suitable for regular use by enthusiasts and tradespersons alike. This product is designed to generate a supply of WARNING! This product is not a toy and must be compressed air at up to the rated pressure for use in respected. - Page 6 4. Product Introduction WARNING! The noise emissions during actual Battery packs (sold separately): use of the product can differ from the declared Stock No. 55907 55898 values depending on the output pressure and the tools with which it is used. Before each use, Part No.
-
Page 7: Health And Safety Information
Important: DO NOT use this product if it is damaged or leaking in any way. Contact Draper Tools to discuss − Ensure that compressed air is not blocked by or in ... -
Page 8: Additional Safety Instructions For Rechargeable Batteries
5.4 Residual Risk Rechargeable Batteries The safety instructions in this manual cannot account for Important: Use ONLY Draper Tools D20 range 4.0Ah all possible conditions and situations that may occur. (Stock No. 55898) and 5.0Ah (Stock No. 55907) battery Exercise common sense and caution when using this packs and chargers with this product (not supplied). -
Page 9: Identification And Unpacking
6. Identification and Unpacking 6.1 Product Overview (11) (6) (8) (10) Battery mounts Outlet Carry handle Output pressure gauge Compressor tank Output pressure regulator Drain valve (10) Safety valve Motor housing (11) Tank pressure gauge ON/OFF switch 6.2 Packaging WARNING! Keep packaging materials out of reach of children. -
Page 10: Operating Instructions
Battery Pack the compressor. Important: ONLY use this tool with batteries and chargers from the Draper Tools D20 range. The batteries MUST be rated 4.0AH or higher. Use of third-party batteries or chargers will invalid your warranty. Read all the safety and operation instructions provided with these parts before use. -
Page 11: Connecting An Air Line Or Tool
4 the off ( ) position before attaching or detaching an air line or tool. Draper Tools recommends pressurising the To detach the connection from the compressor outlet, tank first, leaving the output pressure regulator (9) in its rotate the output pressure regulator (9) fully lowest position, then connecting the air line and tool. -
Page 12: Pressurising The Compressor Tank
7.4 Setting the Output Pressure gauge (11) (the left of the two gauges). Important: This air tool delivers a maximum output Important: Draper Tools recommends pressurising the pressure of 8bar (116psi). NEVER exceed the maximum tank BEFORE attaching an air line or tool. -
Page 13: Depressurising The Compressor Tank
7. Operating Instructions 7.5 Depressurising the Compressor Tank If the thermal overload protection is triggered frequently, stop the operation and contact Draper Tools for support. Important: ALWAYS ensure that the compressor is 7.8 Moisture in Compressed Air switched off, has completely cooled and the battery has... -
Page 14: Maintenance And Troubleshooting
your product inspected by an authorised service 1. Depressurise the compressor tank; see 7.5 engineer; contact Draper Tools for support. Depressurising the Compressor Tank. WARNING! DO NOT use the compressor if 2. Slowly loosen the drain valve (4) fully until the cap you suspect that the structural integrity can be detached. -
Page 15: Storing The Compressor
The output pressure regulator is set Turn the output pressure regulator too low. clockwise to increase the output pressure. The safety valve is faulty. Cease operations immediately and contact Draper Tools for support. DO NOT adjust the safety valve. – 15 –... - Page 16 The regulator or gauges are faulty. Contact Draper Tools for support. Air or liquid output from connected Condensation is present in the Drain the compressor tank and connected tools and hoses;...
-
Page 17: Spares, Returns And Disposal
Draper Tools Product Helpline for details of your nearest authorised agent. Draper Tools will endeavour to hold any spare parts, if applicable, for seven years from the date that it sells the final matching stock item. -
Page 18: Explanation Of Symbols
10. Explanation of Symbols DO NOT incinerate or throw onto fire Read the instruction manual WEEE – Wear face mask and safety glasses Waste Electrical & Electronic Equipment Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish Wear ear defenders European conformity Keep out of the reach of children... - Page 19 Notes – 19 –...
- Page 20 Product Helpline: +44 (0) 23 8049 4344 Telephone Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 Please contact the Draper Tools Product Helpline for repair and servicing enquiries. © Published by Draper Tools Limited © Published by Draper Tools Limited...
Need help?
Do you have a question about the D20 08093 and is the answer not in the manual?
Questions and answers