Advertisement
Quick Links
Assembly
Touch Controls
Adjust
Suction (Vacuum)
Level
Tap the Cimilre logo to turn on the LED night light.
Tap again to adjust brightness and power off.
Press and hold both the up and down level arrows
of either side for 3 seconds to mute or unmute sound.
Pump Operation
To begin pumping, press and hold the power control for Pump 1 or Pump 2 for 3 seconds.
Once the pump is powered on, tap the power control for the other side once to begin
double pumping.
For single pumping, only use one motor. Tap the power control to pause the motor for the
side you will not be pumping.
There are two modes. Levels 1-5 are Massage Mode. Levels 6-12 are Expression Mode.
Para esta información en español visite :
cimilrebreastpumps.com/manuals
S7 Dual Pro
Quick Start Guide
PUMP 1
Sync
Power
(To operate Pump 1
and 2 at the same
suction and
cycle speed)
Cycle Speed (Only available in SYNC Mode)
PUMP 2
Power
Night Light
Adjust
Suction (Vacuum)
Level
Advertisement
Related Manuals for cimilre S7 Dual Pro
Summary of Contents for cimilre S7 Dual Pro
- Page 1 Night Light Tap the Cimilre logo to turn on the LED night light. Tap again to adjust brightness and power off. Press and hold both the up and down level arrows of either side for 3 seconds to mute or unmute sound.
- Page 2 To end session in SYNC Mode, tap either power control. To end session when pumping each side independently, tap the power control for each side. Thanks for choosing Cimilre for your journey. Register your pump! for educational resources and product updates...
Need help?
Do you have a question about the S7 Dual Pro and is the answer not in the manual?
Questions and answers