Advertisement
Table of Contents
Assembly
For single pumping,
attach only one of the
longer pieces of tubing to
the pump.
For double pumping, attach
one end of the small piece of
tubing to the pump and the
other to the 3-way connector.
Then, attach the two long
pieces of tubing to the 3-way
connector.
Button Controls
The pump has 4 buttons.
Power Button
Quick Start Guide
Massage Mode (Levels 1-5)/
Expression Mode (Levels 1-10)
See back for more instructions
Register your pump!
for educational resources and
product updates
E1
White light in Massage Mode/
Blue light in Expression Mode
Suction (Vacuum) Level
Advertisement
Table of Contents
Related Manuals for cimilre E1
Summary of Contents for cimilre E1
- Page 1 Quick Start Guide Assembly For single pumping, attach only one of the longer pieces of tubing to the pump. For double pumping, attach one end of the small piece of tubing to the pump and the other to the 3-way connector. Then, attach the two long pieces of tubing to the 3-way connector.
- Page 2 (blue light). Adjust suction strength for comfort using the arrow level buttons. The battery indicator light is located next to the charging port. Green = Full charge Red = One-third Yellow = Two-thirds Blinking red = Low battery Thanks for choosing Cimilre to be part of your journey. cimilrebreastpumps.com...
Need help?
Do you have a question about the E1 and is the answer not in the manual?
Questions and answers