Download Print this page

CANADA BILLARD & BOWLING INC DIVINE Installation Manual

Air hockey
Hide thumbs Also See for DIVINE:

Advertisement

Quick Links

DIVINE AIR HOCKEY
INSTALLATION MANUAL
2023-07-05
CANADA BILLIARD & BOWLING INC.
4050 Industriel blvd, Laval, QC, H7L 6C3
450-963-5060
W W W.CANADABIL LIARD.COM

Advertisement

loading
Need help?

Need help?

Do you have a question about the DIVINE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CANADA BILLARD & BOWLING INC DIVINE

  • Page 1 DIVINE AIR HOCKEY INSTALLATION MANUAL 2023-07-05 CANADA BILLIARD & BOWLING INC. 4050 Industriel blvd, Laval, QC, H7L 6C3 450-963-5060 W W W.CANADABIL LIARD.COM...
  • Page 2: Lifetime Guarantee

    LIFETIME GUARANTEE CANADA BILLIARD is pleased to offer an unsurpassed LIFETIME GUARANTEE TO THE ORIGINAL PURCHASER against defects in material and workmanship, provided installation and/or service is performed by an Authorized Dealer or a factory-approved installer. Cloth, pockets and rail cushions are not covered under this guarantee.
  • Page 3 DIVINE AIR HOCKEY 07' 08'...
  • Page 4 1 Place the legs stretcher up side down and place the 2 ssemble the leg stretcher and legs base with hexagon (4) wood dowels 1/2” x 2”. bolts 3/8”-16 x 3 1/2”” and flat washers 7/16”. 3 Install the second legs base. 4 Thighten the bolts.
  • Page 5 7 Iasten the legs on legs base with (8) hexagon bolts 8 Tighten the bolts. 3/8” x 3 1/2” and flat washers 7/16”. 10 Turn the legs assembly. 9 Repeat for other legs. 12 Fasten the top legs stretcher to the legs with (8) hexagon bolts 3/8”-16 x 2 1/4”...
  • Page 6 13 Screw the (8) 3/8”-16 x 4 1/2” rod into the top leg 14 Screw the (8) 3/8”-16 x 3” rods into the long base stretcher.. f r ame. 16 Following th image, asemble the base frame using 15 LOOSELY attach the crossmember to the long base 3/8"-16 nuts and 7/16"...
  • Page 7 19 Put in place the four 1/2"-13 hexagonal bolts and 20 Assemble the frame to the legs assembly with flats screw then till the make contat with the metal plate washers 13/32” and hexagon nuts 3/8”-16 . Do not on the top teg stretcher. tig h ten.
  • Page 8 Carefully unwrap the playing surface and put it in place. To do so, you must align the holes in the surface with the holes on the surface supports. At this point, the playing surface will be curve on both ends. this will be corrected later on.
  • Page 9 30 Use #8 x 1 1/4" wood screws to fix the aprons in 31 With help, place and centerthe rail assembly on the place. AT THIS POINT, THE APRON MAY BE SLIGNTLY surface. THIS SHOULD PERFECLY ALIGN THE BORINGS CURVED. BE SUR TO SCREWS THEN IN PLACE WHILE IN THE SURFACE, THE SURFACE SUPPORT AND THE PULLING THEN OUTSIDE OF THE TABLE.
  • Page 10 YOU ARE NOW READY TO PLAY YOUR FIRST GAME OF AIR HOCKEY ON YOUR MAGNIFICENT TABLE FROM CANADA BILLIARD ! CONGRATULATIONS ! CANADA BILLIARD & BOWLING INC. 4050 Industriel blvd, Laval, QC, H7L 6C3 450-963-5060 W W W.CANADABILLIARD.COM...