H5021 GoSmart Zigbee Door Detector IP-2011Z Table of Contents Safety instructions and warnings ................... 2 Contents of the package ......................3 Technical Specifications ......................4 Description of the device ....................... 5 Installation and assembly ....................... 6 Controls and functions ......................10...
Do not use water or chemicals to clean dirt from the outside of the device. Always use a dry cloth to prevent mechanical damage and electric shock. EMOS spol. s r.o. declares that the product H5021 complies with the essential requirements and other relevant provisions of the directives. The equipment can be operated freely in the EU.
Technical Specifications Power supply: 3V CR2032 Dimensions: 25 × 55 × 8 mm APP: EMOS GoSmart for Android and iOS Connectivity: 2.4 GHz Zigbee 3.0 (2 405-2 480 MHz) Notice Sensors must be connected to the ZigBee gateway. The ZigBee gateway itself must be connected to a 2.4 GHz Wi-...
Installation and assembly Remove the back cover and remove the plastic insulation from the battery. Reset the device using the supplied pin by holding the reset button until the indicator light starts flashing. Then pair the sensor with your phone.
Page 7
Use the supplied tape to stick the sensor to the location of your choice. The distance between the two parts of the sensor must be max. 8 mm.
Page 8
• Please scan the QR code to download the app. Steps in the EMOS GoSmart mobile app Open the EMOS GoSmart app and confirm the privacy policy and click I agree. Select the registration option. Enter the name of a valid email address and choose a password.
Page 9
Select Add device. Select the GoSmart product category and select the "Door / Window sensor" device. Select the Zigbee gateway you want to connect the device to. Follow the instructions in the video and description. It is important to turn on and reset the sensor.
Controls and functions Icons and indicator lights Description of icons and controls in the application 1 - Current status indicator 2 - Motion detection and automation trigger records 3 - Automation management (described in a separate chapter) 4 - Sensor settings •...
Page 11
Description of extension settings • Device information - Basic information about the device and its owner • Tap-to-Run and Automation - View scenes and automations assigned to the device. • Offline Notification - To avoid constant reminders, a notification will be sent if the device remains offline for more than 30 minutes.
Troubleshooting FAQ I can't get the devices to pair. What can I do? • Make sure you are using a 2.4GHz Wi-Fi network and have a strong enough signal • Allow the app all permissions in the settings • Make sure you are using the latest version of the mobile operating system and the latest version of the app I'm not getting notifications, why? •...
Need help?
Do you have a question about the H5021 and is the answer not in the manual?
Questions and answers