GoSmart P56000S Manual

Flood sensor

Advertisement

P56000S
GB | Flood sensor
Contents
Technical information ........................................................................................................2
Sensor Description ............................................................................................................3
Pairing with the App .........................................................................................................4
Mobile Application .............................................................................................................7
Commissioning ..................................................................................................................8
GB | 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P56000S and is the answer not in the manual?

Questions and answers

Summary of Contents for GoSmart P56000S

  • Page 1 P56000S GB | Flood sensor Contents Technical information ......................2 Sensor Description ......................3 Pairing with the App ......................4 Mobile Application ......................7 Commissioning ........................8 GB | 1...
  • Page 2 This manual contains important safety information regarding the installation and operation of the sensor. Read the manual carefully and store it safely for future use. Technical information 75 mm 18 mm Operating temperature and humidity: 0 °C to +50 °C, 5 % to 95 % (without condensation) Enclosure rating: IP65 Acoustic signalisation: >...
  • Page 3 Sensor Description 1 – LED 2 – loud siren 3, 4 – water sensor 5, 6, 7 – screws 8 – pairing button 9 – battery GB | 3...
  • Page 4 Pairing with the App 2104104000_105-P56000S 2104104000_106-P56000S 2104104000_108-P56000S GB | 4...
  • Page 5 Creating Scenarios 2104104000_116-P56000S GB | 5...
  • Page 6 2104104000_125-P56000S In order to see info messages regarding alarm state or low batteries, you must first create a so-called Scenario in the app. 1. Tap Smart in the app, tap + in the bottom right corner and then tap the green lightbulb icon.
  • Page 7 Plug a power cable into the gateway and enable GPS and Bluetooth connection on your mobile device. Tap Add Device in the app. Tap the GoSmart list on the left and tap the Smart Multi Gateway IP-1000Z icon. Follow the instructions in the app and enter the name and password for your 2.4 GHz Wi-Fi network.
  • Page 8 The acoustic signal of the alarm cannot be temporarily silenced or turned off. Hereby, EMOS spol. s r. o. declares that the radio equipment type P56000S is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.emos.eu/download.

Table of Contents