ASROCK PENRYN1600SLI-110DB Installation Manual page 7

WARNING
Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
the third-party overclocking tools. Overclocking may affect your system stability, or
even cause damage to the components and devices of your system. It should be
done at your own risk and expense. We are not responsible for possible damage
caused by overclocking.
CAUTION!
1. FSB1600-CPU will operate in overclocking mode.
2. About the setting of "Hyper Threading Technology", please check page
40 of "User Manual" in the support CD.
3. This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 31 for details.
4. This motherboard supports Dual Channel Memory Technology. Before
you implement Dual Channel Memory Technology, make sure to read
the installation guide of memory modules on page 13 for proper
installation.
5. Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
® TM
and Windows Vista
64-bit with 64-bit CPU, there is no such limitation.
6. This motherboard supports NVIDIA
slots (yellow) are intended for SLI
PCI Express VGA card to this motherboard, please install it to PCIE3 slot.
For the information of the compatible SLI
please refer to the "Supported PCI Express VGA Card List for SLI
on page 9. For the proper installation of PCI Express VGA card, please refer
to the installation guide on page 15.
7. For microphone input, this motherboard supports both stereo and mono
modes. For audio output, this motherboard supports 2-channel, 4-
channel, 6-channel, and 8-channel modes. Please check the table on
page 3 for proper connection.
8. Before installing SATAII hard disk to SATAII connector, please read the
"SATAII Hard Disk Setup Guide" on page 27 to adjust your SATAII hard
disk drive to SATAII mode. You can also connect SATA hard disk to SATAII
connector directly.
9. Power Management for USB 2.0 works fine under Microsoft
TM TM
Vista 64-bit / Vista
10. WiFi/E header supports WiFi+AP function with ASRock WiFi-802.11g or
WiFi-802.11n module, an easy-to-use wireless local area network
(WLAN) adapter. It allows you to create a wireless environment and
enjoy the convenience of wireless network connectivity. Please visit our
website for the availability of ASRock WiFi-802.11g or WiFi-802.11n
module. ASRock website
ASRock Penryn1600SLI-110dB Motherboard
®
. For Windows XP 64-bit and Windows
® SLI TM technology. PCIE2 and PCIE4
TM function. If you plan to install only one
TM Mode PCI Express VGA cards,
/ XP 64-bit / XP SP1 or SP2 / 2000 SP4.
http://www.asrock.com
®
XP
® TM
Vista
TM Mode"
® ®
Windows
7 7 7 7 7