WaveSplitter WST-UEX001 Operation Manual

4-port usb3.2 gen1 over cat.6a / 7 extender, 100m

OPERATION MANUAL

Model No. WST-UEX001

4-port USB3.2 Gen1 over Cat.6A / 7 Extender, 100m

Safety Instruction

Wavesplitter .com

TEL：1-510-0651-7800 MAIL：sales@wavesplitter.com

Table of Contents

Need help?

Do you have a question about the WST-UEX001 and is the answer not in the manual?

Page 1 OPERATION MANUAL Model No. WST-UEX001 4-port USB3.2 Gen1 over Cat.6A / 7 Extender, 100m Safety Instruction Copyright ©2020 Wavesplitter AV Technology Wavesplitter .com TEL：1-510-0651-7800 MAIL：sales@wavesplitter.com...
Page 2: Key Features
Introduction WST-UEX001 is a USB3.2 Gen1 extender which can transmit USB3.2 Gen1 signals up to 100m using a Cat6A / 7 ethernet cable. The Receiver (RX) is included with the 4-port hub that can connect with many USB devices. This product supports a maximum bandwidth of 5Gbps and is backward compatible for USB2.0 and USB1.1 devices.
Page 3: Panel Description
4. Attach the brackets to the surface you want to hold the unit against using the screws (provided by others). 5. Repeat the steps from 1 to 4 to install the receiver. Note: Before installation, please ensure the device is disconnected from the power source. Copyright ©2020 Wavesplitter AV Technology Wavesplitter .com TEL：1-510-0651-7800 MAIL：sales@wavesplitter.com...
Page 6: Specifications
Product Structure Main Material TX: Iron｜RX: Iron Size W x D x H TX：105 x 20.5 x 100mm RX：105 x 20.5 x 100mm Weight TX ：280g RX：270g Country of Origin China Copyright ©2020 Wavesplitter AV Technology Wavesplitter .com TEL：1-510-0651-7800 MAIL：sales@wavesplitter.com...