Advertisement

Quick Links

User Manual
ML200
Date: October 2020
Doc Version: 1.0
English
Thank you for choosing our product. Please read the instructions carefully
before operation. Follow these instructions to ensure that the product
is functioning properly. The images shown in this manual are for
illustrative purposes only.
For further details, please visit our Company's website
www.zkteco.com.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ML200 and is the answer not in the manual?

Questions and answers

Summary of Contents for ZKTeco ML200

  • Page 1 User Manual ML200 Date: October 2020 Doc Version: 1.0 English Thank you for choosing our product. Please read the instructions carefully before operation. Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only.
  • Page 2: Table Of Contents

    Important Notes Before registration, the new locks can be unlocked by any authentication method by default. An administrator must be registered first, before any other operation in the Standalone Mode. Four alkaline AA batteries (not included) are needed to power the device. Non- alkaline and rechargeable batteries ARE NOT RECOMMENDED.
  • Page 3: Product Overview

    Product Overview Keypad Battery Cover ZKTeco Button Battery Handle (reversible) Compartments Reset Button Mechanical Key Hole (hidden) Micro-USB Interface Outdoor Unit Indoor Unit Product Features User Introduction: The maximum capacity of all users is 100. The maximum capacity of password is 100.
  • Page 4: Lock Setup

    Emergency Charging: The bottom of the outdoor unit is provided with a Micro-USB interface. Use a power bank to charge the lock when it is out of power. Emergency Mechanical Key: The mechanical key is used to open the door when the lock has any electronic malfunction.
  • Page 5: Programming The Lock In Standlone Mode

    Factory Default Mode first to program your lock in Standalone Mode. 3.1 Add the Admin Password in Standalone Mode Operation Indicator’s Status Press and hold the ZKTeco Button for 2 short beeps with flashing green 3 seconds light 1 short beep with green light, then Enter a six-digit password and press flashing green light...
  • Page 6: Adding The Smart Gateway

    3.2 Add the User Password in Standalone Mode Operation Indicator’s Status Press and hold the ZKTeco Button for 2 short beeps with flashing blue light 3 seconds Verify the administrator’s identity by 1 short beep with green light, then entering the password then pressing flashing green light...
  • Page 7: Connecting To Amazon Alexa Or Google Assistant

    ZKTeco Button to confirm Note: You can press the ZKTeco Button to turn on the keypad backlight. Users may enter a random password to prevent any person from observing the password. The maximum length of a random password is 32 digits.
  • Page 8: Unlocking Door With Voice Assistant

    Note: If you have already paired the lock with the gateway, you don’t need to turn on Bluetooth. When unlocking the lock via Bluetooth, please stay near the lock (within 10 meters without obstacles). *Unlocking Door with Voice Assistant Answer the additional Rotate the handle down Perform the voice voice security codes...
  • Page 9 Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 10 Ctra. Fuencarral 44. Edi cio 1, Planta 2. 28108 Alcobendas, Madrid. Spain Phone: +34 916 532 891 Mail: sales@zkteco.eu www.zkteco.eu Copyright 2020 ZKTECO EU. All rights Reserved...

Table of Contents