ASROCK P45X3 DELUXE - V1.0 User Manual page 21

Table of Contents

Enjoy the benefit of CrossFireX

Different CrossFireX

feature. In below procedures, we use Radeon 4850 as the example graphics card. For

other CrossFireX

refer to ATI

graphics card manuals for detailed installation guide.

Step 1.

There is one ASRock SLI/XFire Switch Card factory-mounted on this

motherboard. This card served as a switch between the default mode

(x16) and CrossFireX

factory-mounted with its default mode (x16) side toward the retention slot

base.

Step 2.

To change it to CrossFireX

ASRock SLI/XFire Switch Card. Please simultaneously pull open both the

retention arms that hold the card in position. The card itself will spring

away from the retention slot. Take it out gently by holding its edges, and

keep away from touching the connectors (Golden Fingers).

Step 3.

Reverse the card direction so as to have the "X8 / X8 MODE" wording side

toward the retention slot base. Insert the card into the bottom of the base.

cards may require different methods to enable CrossFireX

cards that ATI

has released or will release in the future, please

mode (x8 / x8). ASRock SLI/XFire Switch Card is

Mode, you need to reverse the direction of

2 1

Table of Contents

P45x3 deluxe