Installation - ASROCK P45TS - V1.0 User Manual

2.12 Serial A 2.12 2.12 Serial A Serial A Serial AT T T T T A (SA A (SA A (SAT T T T T A) / Serial A A (SA
2.12 2.12 Serial A A (SA

Installation

Installation Installation Installation Installation
P45TS-R adopts Intel ICH10R south bridge chipset that supports Serial ATA
®
(SATA) / Serial ATAII (SATAII) hard disks and RAID (RAID 0, RAID 1, RAID 10, RAID
5, and Intel Matrix Storage) functions. P45TS adopts Intel
chipset that supports Serial ATA (SATA) / Serial ATAII (SATAII) hard disks. You may
install SATA / SATAII hard disks on this motherboard for internal storage devices.
This section will guide you to install the SATA / SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
1. If you plan to use RAID 0, RAID 1, RAID 10 or Intel Matrix Storage
function, you need to install at least 2 SATA / SATAII hard disks. If you
plan to use RAID 5 function, you need to install at least 3 SATA / SATAII
hard disks.
2. It is not recommended to switch the "Configure SATAII as" setting after
OS installation.
A) / Serial AT T T T T AII (SA A) / Serial A A) / Serial A AII (SAT T T T T AII) Hard Disks AII (SA AII (SA
A) / Serial A AII (SA
3 4 3 4 3 4
3 4 3 4
AII) Hard Disks AII) Hard Disks AII) Hard Disks
AII) Hard Disks
ICH10 south bridge
®