ASROCK P43TWINS Installation Manual page 29

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Using SATA / SATAII HDDs and eSATAII devices with NCQ function
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [AHCI].
STEP 2: Make a SATA / SATAII driver diskette.
A. Insert the Support CD into your optical drive to boot your system.
B. During POST at the beginning of system boot-up, press <F11> key, and then a
window for boot devices selection appears. Please select CD-ROM as the boot
device.
C. When you see the message on the screen, "Do you want to generate Serial
ATA driver diskette [YN]?", press <Y>.
D. Then you will see these messages,
Please insert a diskette into the floppy drive.
WARNING! Formatting the floppy diskette will
lose ALL data in it!
Start to format and copy files [YN]?
Please insert a floppy diskette into the floppy drive, and press <Y>.
E. The system will start to format the floppy diskette and copy SATA / SATAII
drivers into the floppy diskette.
STEP 3: Install Windows
®
not supported.)
After making a SATA / SATAII driver diskette, you can start to install Windows
64-bit on your system. At the beginning of Windows
party AHCI driver. When prompted, insert the SATA / SATAII driver diskette containing
the Intel
®
AHCI driver. After reading the floppy disk, the driver will be presented. Select
the driver to install according to the mode you choose and the OS you install. You may
select: "Intel(R) ICH10 SATA AHCI Controller (Desktop - Windows XP)" for Windows
or "Intel(R) ICH10 SATA AHCI Controller (Desktop - Windows XP64)" for Windows
64-bit.
Using SATA / SATAII HDDs and eSATAII devices without NCQ function
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [IDE].
®
STEP 2: Install Windows
Advanced screen
XP / XP 64-bit OS on your system. (Windows
®
setup, press F6 to install a third-
Advanced screen
2000 / XP / XP 64-bit OS on your system.
ASRock Motherboard
IDE Configuration.
®
2000 is
®
XP / XP
®
XP
®
XP
IDE Configuration.
2 9
2 9
2 9
2 9
2 9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P43twins1600P43d1600twinsP43d1600twins-1394

Table of Contents