Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Iridium LED WASH 1940Z
Summary of Contents for Iridium LED WASH 1940Z
- Page 1 LED WASH 1940Z Art. No. : 108478...
-
Page 2: Table Of Contents
SUMMARY 1. Product introduction 2. Safety and maintenance Information 3. Installation 4. Control menu 5. DMX connection and DMX protocol 6. Unique Features 7. Dimensions Drawing 8. Technical specifications... -
Page 3: Product Introduction
1. Product Introduction: 1.1 Before unpack the fixture, pls make sure that the packing is in good condition, following items will be found in the box: • Led Wash 1940Z • This users guide • 3m DMX cable • 1.5m power cable with True 1 •... - Page 4 1.3 Description of the Device 1. Project lens 2. Head 3. Arm 4. Base 5. Display 6. Operation button 7. Foot stand 8. Antenna 9. Handle True 1 out True 1 in...
-
Page 5: Safety And Maintenance Information
2. Safety and maintenance Information 2.1. Safety Info Before operate this unit, please carefully read this users guide and keep if needed in future. It’s necessary to respect following rules. The disposal of the device after lifecycle could damage the environment, need to take it to spe- cial company for recycling or return to authorized dealer. - Page 6 2.2. Maintenance 2.2.1. Operation only allowed to qualified person, damages due to unprofessional operation or remove of any parts inside will not be considered in warranty service. There are no serviceable parts inside the device or package, service only leaves to authorized dealers. 2.2.3.
-
Page 7: Installation
3. Installation The device could be either put on a solid and even Surface, or mounted upside down or sideways like left picture. The mounting place must be sufficient stable and be able to support a weight of 10 times of the unit’s weight. - Page 8 4.2 Menu tree Default setting shadowed. mark with can be basic reloaded, be program reloaded, can be private reloaded.
-
Page 10: Dmx Connection And Dmx Protocol
4. DMX connection and DMX protocol 5.1. DMX addressing: 5.1.1. The device is controlled by universal DMX 512 protocol, DMX address is the start channel used to receive instructions from the external controller. For independent control, each fixture must be assigned its unique address control channels. For example, this device has four channel modes: 19/26/38/23, if we set the mode at standard 19 channels mode, and there are several models need to be independently controlled, we just simply address first fixture at 1, and second fixture at 20, third one at 39, etc. - Page 11 5.1.4 Connection: use DMX cable with 3+5 pin XLR-plugs to connect the controller with the fixture or one fixture with another. 5.2 DMX chart...
-
Page 18: Unique Features
6. Unique Features RDM, stand for “Remote Device Management”, with this function, users can realize remote control of the device, such as remotely changing DMX address, reverse pan/tilt setting, check a lot of useful information such as tempera- ture, power consumption, fan speed. Etc. Every single device has a unique RDM code before left factory to distinguish from each other, usually not suggest users change this code freely. -
Page 19: Dimensions Drawing
7. Dimensions Drawing 8. Technical specification 18/23/25/37 ch... - Page 20 LED WASH 1940Z Art. No. : 108478 IMPORTER B&K LUMITEC ZI – 2 Rue Alfred Kastler – 67850 Herrlisheim – France www.bklumitec.com...
Need help?
Do you have a question about the LED WASH 1940Z and is the answer not in the manual?
Questions and answers