Smart Screen - ASROCK N68-GS UCC User Manual

3 . 3 3 . 3

Smart Screen

Smart Screen
3 . 3 3 . 3 Smart Screen 3 . 3 Smart Screen Smart Screen
In the Smart screen, you can load the BIOS setup according to your requirements.
Main Smart
Smart Settings
Save Changes and Exit
Load BIOS Defaults
Load Performance Setup Default (IDE/SATA)
Load Performance Setup RAID Mode
Load Power Saving Setup Default
BIOS Update Utility
ASRock Instant Flash
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Save Changes and Exit
When you select this option, it will pop-out the following message, "Save
configuration changes and exit setup?" Select [OK] to save the changes and
exit the BIOS SETUP UTILITY.
Load BIOS Defaults
Load BIOS default values for all the setup questions. F9 key can be used for
this operation.
Load Performance Setup Default (IDE/SATA)
This performance setup default may not be compatible with all system
configurations. If system boot failure occurs after loading, please resume
optimal default settings. F5 key can be used for this operation.
Load Performance Setup RAID Mode
This performance setup RAID mode may not be compatible with all system
configurations. If system boot failure occurs after loading, please resume
optimal default settings. F4 key can be used for this operation.
Load Power Saving Setup Default
Load power saving setup default. F6 key can be used for this operation.
ASRock Instant Flash
ASRock Instant Flash is a BIOS flash utility embeded in Flash ROM. This
convenient BIOS update tool allows you to update system BIOS without
entering operating systems first like MS-DOS or Windows. Just launch this
tool and save the new BIOS file to your USB flash drive, floppy disk or hard
drive, then you can update your BIOS only in a few clicks without preparing an
additional floppy diskette or other complicated flash utility. Please be noted
that the USB flash drive or hard drive must use FAT32/16/12 file system. If
you execute ASRock Instant Flash utility, the utility will show the BIOS files
and their respective information. Select the proper BIOS file to update your
BIOS, and reboot your system after BIOS update process completes.
BIOS SETUP UTILITY
Advanced H/W Monitor Boot
3 3 3 3 3 3 3 3 3 3
Security Exit
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit