ROOMS TO GO D858-64 Assembly Instructions

ASSEMBLY
INSTRUCTIONS
Thank you for purchasing this quality product. Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the
parts from being scratched. Be sure to check all packing materials carefully for small parts may have come loose inside the carton during
shipment, clarify and count all parts and compare with the parts list below. Do not tighten all screws / bolts until all completely assembled.
Parts List
No. Description
❶
1 Leg
❷
Leg
2
3 Cushion Seat
4 Long Front/Rear Stretcher
5 Short Side Stretcher
NOTE : YOU WILL ALSO NEED A SCREWDRIVER (NOT PROVIDED)
These parts are cumbersome and heavy. Therefore, two people are recommended in order to prevent personal injury and insure the
parts are not damaged during the assembly.
Important Notes
★ Keep all hardware parts out of reach of
children!
★ Tighten screws periodically! With the
use of this product bolts and screws may
become loose over time!
★ Don't attempt to modify parts!
Cleaning instruction: Clean using soft cloth
Q.ty
No. Description
2PCS A Ball End Allen Key
2PCS
B JCBC Bolt
1PC
C Spring Washer
2PCS
D Flat Washer
Pan Head Screw
2PCS
G
1
2
4
5
Page 1/4
UPH COUNTER STOOL
Hardware List
Sketch
3
1
4
ITEM NO.: D858-64
Size Q.ty
M4 1PC
M6 x 45mm 4PCS
M6 x 13mm
4PCS
M6 x 19mm
4PCS
M4 x 45mm
8PCS
2
5
Made in Malaysia
20230305