Table of Contents
Advertisement
3.3 OC T
3.3
3.3
OC Tweak
OC T
OC T
weak
weaker Screen
weak
er Screen
er Screen
er Screen
3.3
3.3
OC T
weak
er Screen
In the OC Tweaker screen, you can set up overclocking features.
Main
OC Tweaker
CPU Configuration
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Boot Failure Guard
CPU/LDT Spread Spectrum
PCIE Spread Spectrum
SATA Spread Spectrum
Processor Maximum Frequency
Processor Maximum Voltage
Multiplier/Voltage Change
HT Bus Speed
HT Bus Width
Memory Configuration
Memory Clock
DRAM Voltage
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
CPU Configuration
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Configura-
tion options: [Auto], [CPU, PCIE, Sync.], [CPU, PCIE, Async.] and [Optimized].
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
CPU/LDT Spread Spectrum
This feature will be set to [Enabled] as default. Configuration options:
[Disabled] and [Enabled].
PCIE Spread Spectrum
This feature will be set to [Enabled] as default. Configuration options:
[Disabled] and [Enabled].
SATA Spread Spectrum
This feature will be set to [Enabled] as default. Configuration options:
[Disabled] and [Enabled].
Processor Maximum Frequency
It will display Processor Maximum Frequency for reference.
North Bridge Maximum Frequency
This option appears only when you adopt Phenom CPU. It will display North
Bridge Maximum Frequency for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
BIOS SETUP UTILITY
Advanced
H/W Monitor
Boot
Overclocking may cause
[Auto]
damage to your CPU and
[200]
motherboard.
[100]
It should be done at
[Enabled]
your own risk and
[Enabled]
expense.
[Enabled]
[Enabled]
x10.5 2100 MHZ
1.2500 V
[Auto]
[Auto]
[Auto]
Enter Go to Sub Screen
F1
F9
F10
[Auto]
ESC
[Auto]
3 4
3 4
3 4
3 4
3 4
Security
Exit
Select Screen
Select Item
General Help
Load Defaults
Save and Exit
Exit
Advertisement
Table of Contents
