Nice MYGO2BD Instructions And Warnings For Installation And Use

Nice MYGO2BD Instructions And Warnings For Installation And Use

Two-way transmitters

Advertisement

Quick Links

MyGO
MYGO2BD
MYGO2BD/A
MYGO4BD
MYGO4BD/A
MYGO8BD
MYGO8BD/A
Two-way transmitters
EN - Instructions and warnings for installation and use
MYGO2BD
MYGO2BD/A
MYGO4BD
MYGO4BD/A
1
5
2
6
3
7
4
8
MYGO8BD
MYGO8BD/A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MYGO2BD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Nice MYGO2BD

  • Page 1 MyGO MYGO2BD MYGO2BD/A MYGO4BD MYGO4BD/A MYGO8BD MYGO8BD/A MYGO2BD MYGO4BD MYGO8BD MYGO2BD/A MYGO4BD/A MYGO8BD/A Two-way transmitters EN - Instructions and warnings for installation and use...
  • Page 2: Table Of Contents

    – If the battery compartment does not close tightly, stop using the product and keep it out of reach of children. – The manufacturer of this appliance, Nice S.p.A., hereby declares that the product complies with Directive 2014/53/EU. – The instruction manual and the full text of the EU Declaration of Conformity are available at the following Internet address: www.niceforyou.com, under the “support”...
  • Page 3: Product Description And Intended Use

    MYGO8BD - MYGO8BD/A Two-colour signalling LED and automation status request button Hole for unlocking and removing the rear shell Control buttons area for models MYGO2BD (MYGO2BD/A) Control buttons area for models MYGO4BD (MYGO4BD/A) Control buttons area for models MYGO8BD (MYGO8BD/A) TRANSMITTER FUNCTIONS For the encoding switch procedure, refer to the paragraph “ENCODING...
  • Page 4: Memorising The Transmitter

    3.2.4 MEMORISATION THROUGH THE “ENABLING CODE” MEMORISING THE TRANSMITTER (BETWEEN AN OLD TRANSMITTER ALREADY MEMORISED AND A NEW TRANSMITTER) MEMORISING THE TRANSMITTER The MYGOBD (MYGOBD/A) transmitter has a secret code, the so-called “ENABLING CODE”. By transferring this code from a memorised transmit- TRANSMITTER VERIFICATION ter to a new transmitter, the latter is recognised (and memorised) automat- Before memorising the transmitter in the automation’s receiver, ensure that...
  • Page 5: Status Request Procedure

    In this specific case, Nice S.p.A. cannot offer any guarantee regarding the status of all the automations. REPLACING THE BATTERY...
  • Page 6: Product Disposal

    press the battery in point (1) and twist the case (B) to release the PRODUCT DISPOSAL battery from the clip holding it (2) so that it can be removed PRODUCT DISPOSAL This product is an integral part of the operator and must therefore be disposed of with it.
  • Page 7: Technical Specifications

    CONFORMITY 10.1 SIMPLIFIED EU DECLARATION OF CONFORMITY The manufacturer, Nice S.p.A., declares that the product MYGO2BD - MYGO4BD - MYGO8BD is compliant with the directive 2014/53/UE. The full text of the EU declaration of conformity is available at the following internet address: https://www.niceforyou.com/en/support.
  • Page 8 Nice SpA Via Callalta, 1 31046 Oderzo TV Italy www.niceforyou.com info@niceforyou.com...

This manual is also suitable for:

Mygo2bd/aMygo4bdMygo4bd/aMygo8bdMygo8bd/a

Table of Contents