Traxxas 4 TEC 2.0 AWD CHASSIS BL-2S BRUSHLESS POWER SYSTEM Owner's Manual

Hide thumbs Also See for 4 TEC 2.0 AWD CHASSIS BL-2S BRUSHLESS POWER SYSTEM:

User manual

page of 30

/ 30
Bookmarks

Quick Links

Download this manual

MODEL 83124-4

owner

s manual

Table of Contents

Need help?

Do you have a question about the 4 TEC 2.0 AWD CHASSIS BL-2S BRUSHLESS POWER SYSTEM and is the answer not in the manual?

Questions and answers

Summary of Contents for Traxxas 4 TEC 2.0 AWD CHASSIS BL-2S BRUSHLESS POWER SYSTEM

Page 1 MODEL 83124-4 owner s manual ’...
Page 2 ADJUSTING THE ELECTRONIC Thank you again for choosing Traxxas. We work hard every day SPEED CONTROL to ensure you receive the highest level of customer satisfaction possible. We truly want you to enjoy your new model!
Page 3: Before You Proceed
Traxxas service needs. Maintenance and replacement identified by the icons below. Be sure to read them! Ready-To-Win, BL-2s, and parts may be purchased directly from Traxxas by phone or online ProGraphix are trademarks or An important warning about personal safety or avoiding at Traxxas.com.
Page 4: Safety Precautions
SAFETY PRECAUTIONS All of us at Traxxas want you to safely enjoy your new model. Operate • Insulate the Wires: Always insulate exposed wiring with heat shrink your model sensibly and with care, and it will be exciting, safe, and tubing to prevent short circuits.
Page 5 • ONLY use a Traxxas iD charger to charge Traxxas iD batteries. identifying the battery type and specifications. ONLY use a Lithium Polymer (LiPo) balance charger with a •...
Page 6 • Nickel-Metal Hydride (NiMH) batteries must be recycled or discharge, or use the battery. disposed of properly. • Keep a Class D fire extinguisher nearby in case of fire. • Always proceed with caution and use good common sense at all times. 6 • TRAXXAS...
Page 7: Tools, Supplies, And Required Equipment
Body clips Fixed body mounts model, but are a good idea to include in any RC toolbox: • Safety glasses • Traxxas Ultra Premium Tire Glue, part #6468 (CA glue) • Hobby knife • Side cutters and/or needle nose pliers...
Page 8 Steering Rear Adjustable Servo Body Mount LED Light Pipe Motor Front Adjustable Body Mount Rear Camber Link Receiver Box Front Shock Tower Electronic Speed Rear Suspension Arm Pinion Gear Antenna Mount Toe Link Front Camber Link Control 8 • TRAXXAS...
Page 9: Quick Start: Getting Up To Speed
6. Turn on the radio system • See page 15 Make a habit of turning the transmitter on first and off last. Look for the Quick Start logo at the bottom of Quick Start pages. TRAXXAS • 9...
Page 10 TRAXXAS TQ 2.4GHz RADIO SYSTEM INTRODUCTION power more efficiently than mechanical speed controls so that Your model includes the TQ 2.4GHz transmitter. When powered the batteries run longer. An electronic speed control also has Applying the Decals on, the TQ 2.4GHz will automatically locate and lock onto an...
Page 11 TRAXXAS TQ 2.4GHz RADIO SYSTEM Resistance - In an electrical sense, resistance is a measure of how 2-channel radio system - The TQ radio system, consisting of an object resists or obstructs the flow of current through it. the receiver, the transmitter, and the servos. The system uses To prevent loss of radio range, When flow is constricted, energy is converted to heat and is lost.
Page 12 TRAXXAS TQ 2.4GHz RADIO SYSTEM Your model is equipped with the Traxxas TQ 2.4GHz transmitter. MODEL WIRING DIAGRAM BL-2s Wiring Diagram The transmitter has two channels: Channel one operates the Motor steering, and channel two operates the throttle. The receiver...
Page 13 Refer to the to avoid losing control. select. Traxxas recommends you choose a genuine Traxxas EZ-Peak iD Troubleshooting section on page 17 for more information on charger for safer charging and maximum battery life and performance.
Page 14 Secure, long-lasting, and easy and do not bend or cut the white to grip, the Traxxas connector is engineered to extract all the power wire at the end of the metal tip. your battery has to give.
Page 15 TRAXXAS TQ 2.4GHz RADIO SYSTEM RADIO SYSTEM CONTROLS • In order for the transmitter and receiver to bind to one another, the receiver in the model must be turned on within 20 seconds Make certain the model’s of turning on the transmitter. The transmitter LED will flash fast receiver antenna is properly red, indicating a failure to link.
Page 16 TRAXXAS TQ 2.4GHz RADIO SYSTEM Throttle reversing procedure: 6. When looking down at the Note: Throttle reversing is often times unnecessary on electric model, the front wheels Using Reverse: While driving, models, as issues with the throttle can usually be solved by...
Page 17 TRAXXAS TQ 2.4GHz RADIO SYSTEM Higher Speeds Require Greater Distance TQ 2.4GHz Binding Instructions The faster you drive your model, the more quickly it will near the For proper operation, the transmitter and receiver must be Failsafe limit of radio range. At top speeds, models can cover anywhere electronically ‘bound.’...
Page 18: Adjusting The Electronic Speed Control
When you turn your model on, the BL-2s speed control’s status LED will glow green, Battery connector: 2. Turn on the transmitter (with the throttle at neutral). Traxxas iD® High-Current indicating that Low-Voltage Detection is activated to prevent over-discharging of 3. Press and hold the EZ-Set button (A). The LED will first Connector LiPo batteries.
Page 19 Adjust the Throttle Trim to the middle “0” setting. then solid red and then begins blinking red (indicating the Profile numbers). 3. When the LED blinks red three times, release Green to Red to Off Three blinks Red the EZ-Set button. TRAXXAS • 19...
Page 20: Driving Your Model
RUNNING IN WET CONDITIONS result in poor performance and broken parts. Take care of your Your new Traxxas model is designed with water-resistant features model so that you can enjoy it for a long time to come. to protect the electronics in the model (receiver, servos, electronic •...
Page 21 3. Rinse excess dirt and mud off the truck with low-pressure water, • The Traxxas TQ 2.4GHz transmitter is not water resistant. Do not such as from a garden hose. Do NOT use pressure washer or other subject it to wet conditions such as rain.
Page 22 Label which wire is for which channel. 4. Apply a small bead of silicone grease (Traxxas part #1647) to the wire clamp. 5. Using double-sided adhesive foam tape, install the receiver into the box. 22 • TRAXXAS...
Page 23: Adjusting Your Model
5. Elevate the model on a block or stand so that all of the tires are off the ground. Connect a fresh battery pack to the speed control and turn on the ESC (see page 18). The servo will automatically jump to its center position. TRAXXAS • 23...
Page 24 1.72 10,000W viscosity silicone oil. acceleration and top speed. If you want more top speed and less Only use silicone oil in the differentials. Traxxas offers SAE 10,000W, acceleration, install optional high-speed gearing (more teeth). Out of box setup, recommended...
Page 25 Be sure the rubber gaskets are in place, or the differential 5. Use a 1.5mm hex wrench to remove the two screw pins that hold may leak. the drive cups to the differential output shafts. 5. Install the 2.5x8mm screws and tighten securely. TRAXXAS • 25...
Page 26 Save the material you remove and add it to the opposite side of the arms to act as a spacer, or use washers to shim the arms. Note: The front suspension arms are not adjustable and should not be modified or trimmed. 26 • TRAXXAS...
Page 27 Moving the links from the standard holes to the outer holes will increase camber and slightly reduce roll stiffness. This modification also requires adjustable camber links (part #8341X, sold separately) to lengthen the links and ensure proper camber settings. TRAXXAS • 27...
Page 28: Maintaining Your Model
If the bottom of the shock is leaking, then it is time for a rebuild. The Traxxas rebuild kit for two shocks is part #2362. 11 11...
Page 29 TRAXXAS • 29...
Page 30 ’ 6250 TRAXXAS WAY, McKINNEY, TEXAS 75070 1-888-TRAXXAS 240613 83124-4-OM-EN-R01...

This manual is also suitable for:

83124-4